用于印字模切机控制式差动无级变速器设计.docx

 PAGE \* MERGEFORMAT I  PAGE \* MERGEFORMAT II 用于印字模切机的控制式差动无级变速器设计 摘 要 无级变速器在现代机械行业占据有重要地位，并有着广泛的应用，而现有的机械无级变速器的调速范围大多在R=4~6之间，无法满足该设计要求。因而把机械式无级变速器和行星轮系进行适当组合，使机械式无级变速器去封闭差动轮系的两个输入端，从而形成“控制式差动无级变速器”，利用差动合成来得到广泛的输出范围，从而达到设计要求。通过运动学分析计算，在文中给出了配齿、各级转速、各级功率、各级扭矩以及各级行星轮系的具体计算过程和结果，并通过验证来证明该方式的可行性。 关键词：行星轮系，控制式差动无级变速器，差动合成，运动学分析  PAGE \* MERGEFORMAT III  PAGE \* MERGEFORMAT II Design of Control Type Differential Stepless Speed Changer For Printing Die-cutting Machine Abstrac CVT in modern mechanical industry occupies has an important position, and has a wide range of applications, and existing mechanical CVT speed range mostly between the R=4~6, unable to meet the design requirements. So the proper combination of mechanical stepless speed variator and a planetary gear system, mechanical CVT to closed differential gear train of the two input end, to form a controlled differential stepless speed variator, using differential synthetic came to a wide range of output, so as to achieve the design requirement. Through the kinematics analysis calculation in this paper are the dentate, speed at all levels, all levels of power, torque at all levels and at all levels of the planetary gear train specific meter The process and results are verified to demonstrate the feasibility of the proposed method. Key Words:Planetary gear train，Controlled differential stepless speed variator，Differential synthesis，Kinematic analysis  陕西科技大学毕业论文 目 录 TOC \o 1-3 \h \u  HYPERLINK \l _Toc2567 摘 要  PAGEREF _Toc2567 I  HYPERLINK \l _Toc12648 Abstrac  PAGEREF _Toc12648 II  HYPERLINK \l _Toc25830 1 绪论  PAGEREF _Toc25830 1  HYPERLINK \l _Toc21881 1.1 控制式差动无级变速器发展现状  PAGEREF _Toc21881 1  HYPERLINK \l _Toc2764 1.1.1 渐开线行星齿轮传动发展现状  PAGEREF _Toc2764 1  HYPERLINK \l _Toc7457 1.1.2 国内控制式差动无级变速器发展过程  PAGEREF _Toc7457 1  HYPERLINK \l _Toc14565 1.1.3 国内控制式差动无级变速器研究现状  PAGEREF _Toc14565 3  HYPERLINK \l _Toc28735 1.1.4 国外控制式差动无级变速器研究现状  PAGEREF _Toc287