HPUXroot解锁.docVIP

从HPUX后面MP LAN网线接入笔记本 Telnet 登入 选择分区 Steps 1: Connect to the ILO of the server and connect to the Command Menu of the server MP MAIN MENU: CO: Console VFP: Virtual Front Panel CM: Command Menu CL: Console Log SL: Show Event Logs HE: Main Help Menu X: Exit Connection [Server-ilo] MP CM Steps 2: After connecting to the Command Menu power off and power on the server. The option for this is PC(power cycle) Steps 3: Now the server starts booting, interrupt the boot process by pressing Esc-Esc. Steps 4: The server will come to Main Menu. There boot the server by typing boot Main Menu: Enter command or menu boot The below message is displayed to interact with ISL prompt or not. Say yes there to boot the server in single user-mode Main Menu: Enter command or menu bootInteract with IPL (Y, N, or Cancel)? y Steps 5: Boot the server in single user mode at the ISL prompt with the command “hpux –is” ISL hpux –is Steps 6: The server boots in single user mode and the server comes to # prompt. Steps 7: The server is now in single user mode. As the server is converted to the trusted system even though you reset the password for root it will not work for the next login. For this the system needs to convert to un trusted mode. To convert the system to un trusted mode the below mount points need to be mounted /usr /var /opt Steps 8: These needs to be mounted manually. while mounting these file systems the error to run fsck may occur, then run fsck on the file system and mount the file systems #mount /usr Error: run fsck on /dev/vg00/lvol5/usr #fsck /dev/vg00/rlvol5/usr #mount /usr Steps 9: After mounting the above mentioned mount points then run the below command to convert the system to the un trusted mode # /usr/lbin/tsconvert –r Steps 10: Now the root password can be changed #passwd root Steps 11: Boot the server using the “reboot” command. Now the new root password will work. Thatz it , NOW you have your new root password for your system :). This Hub was last updated on February