LCLS Design Parameters Advanced Photon SourceLCLS的设计参数的先进光子源.pptVIP

Enter presentation date [Your Presentation Title] Test 1st ANL LCLS All Hands Meeting 20 February, 2006 Purpose Remind you what the project is all about. Bring you up to date on the overall project status. Define clearly what ANL/APS is to deliver. Bring you up to date on the details of where we are at with the delivery of the LCLS undulator system. Where possible explain the transition from ANL to SLAC. Give some look ahead about what we need to accomplish in the coming couple of years. Explain where required how we are managing this. The World’s First Hard X-ray Laser LCLS Design Parameters Fundamental FEL Radiation Wavelength 1.5 15 ? Electron Beam Energy 14.3 4.5 GeV Normalized RMS Slice Emittance 1.2 1.2 mm-mrad Peak Current 3.4 3.4 kA ρ Parameter 4x10-4 8x10-4 Bunch/Pulse Length (FWHM) ≤230 ≤ 230 fs Relative Slice Energy Spread @ Entrance 0.01 0.025 % Saturation Length 87 25 m FEL Fundamental Saturation Power @ Exit 8 17 GW FEL Photons per Pulse 1 29 1012 Peak Brightness @ Undulator Exit 0.8 0.06 1033 * Transverse Coherence Full Full RMS Slice X-Ray Bandwidth 0.06 0.24 % RMS Projected X-Ray Bandwidth 0.13 0.47 % * photons/sec/mm2/mrad2/ 0.1%-BW Preliminary Safety Assessment Document Approved 26 January 2006 /projectspace_L2/Project_Office/PMD/PMD_Documents/1.1-016-r0_PSAD_January2006-3.pdf Preliminary Fire Hazard Analysis Approved 14 October 2005 /projectspace_L2/Project_Office/PMD/PMD_Documents/PMD_1.1-012.pdf LCLS ESH Plan in place – rev. 2 dated January 2006 /projectspace_L2/Project_Office/PMD/PMD_Documents/1.1-011-r2_LCLS_Site_Safety_Program60103.pdf Updated Project Management Plan Approved 4 April 2005 /projectspace_L2/Project_Office/PMD/PMD_Documents/PMD-1.1-001-r1_Project_Mgt_Plan-APril05.pdf Environmental Assessment confirmed 2/2003, confirmed 1/2006 /lcls/documents/mtf_ss-sc-06-04_lcls_e