外文的资料Functional Specification Standard Card IC MF1 IC S50.docVIP

外文: Functional Specification Standard Card IC MF1 IC S50 1 FEATURES 1.1 MIFARE??RF Interface (ISO/IEC 14443 A) ? Contactless transmission of data and supply energy (no battery needed) Operating distance: Up to 100mm (depending on antenna geometry) Operating frequency: 13.56 MHz Fast data transfer: 106 kbit/s High data integrity: 16 Bit CRC, parity, bit coding, bit counting True anticollision Typical ticketing transaction: 100 ms (including backup management) 1.2 EEPROM 1 Kbyte, organized in 16 sectors with 4 blocks of 16 bytes each (one block consists of 16 byte) User definable access conditions for each memory block Data retention of 10 years. Write endurance 100.000 cycles 1.3 Security Mutual three pass authentication (ISO/IEC DIS9798-2) Data encryption on RF-channel with replay attack protection Individual set of two keys per sector (per application) to support multi-application with key hierarchy Unique serial number for each device Transport key protects access to EEPROM on chip delivery 2 GENERAL DESCRIPTION Philips has developed the MIFARE? MF1 IC S50 tobe used in contactess smart cards according to ISO/IEC 14443A. The communication layer (MIFARE? RF Interface) complies to parts 2 and 3 of the ISO/IEC 14443A standard. The security layer sports the field-proven CRYPTO1 stream cipher for secure data exchange of the MIFARE? Classic family. 2.1 Contactless Energy and Data Transfer In the MIFARE? system, the MF1 IC S50 is connected to a coil with a few turns and then embedded in plastic to form the passive contactless smart card. No battery is needed. When the card is positioned in the proximity of the Read Write Device (RWD)antenna, the high speed RF communication interface allows to transmit data with 106 kBit/s. 2.2 Anticollision An intelligent anticollision function allows to operate more than one card in the field simultaneously. The anticollision algorithm selects each card individually and ensures that the execution of a transaction with a selected card is