英文的资料基于统一建模语言的异步电机建模及仿真.docVIP

编号： 毕业设计(论文)外文翻译 （原文+译文） Field Weakening of Permanent Magnet Machines Design Approaches 外地弱化永磁电机设计方法 院 （系）： 机电工程学院 专 业： 机械设计制造及其自动化 学生姓名： 学 号： 指导教师单位：机械设计制造及其自动化教研室 姓 名： 职 称： 教授 /副教授 2009年 6月1日 编号： Field Weakening of Permanent Magnet Machines Design Approaches T. A. Lipo and M. Aydin Electrical and Computer Engineering Department University of Wisconsin-Madison 1415 Engineering Drive Madison, WI 53706-1691, U.S.A Email: lipo@ Caterpillar Inc. Technical Center TC-G 855 P.O. Box 1875 Peoria, IL, 61656-1875, USA Email: aydin_metin@ Abstract - Permanent Magnet (PM) machines have been developed for numerous applications due to their attractive features especially after the development of NdFeB magnets. However, their complicated control lets the researchers develop new machine structures with easy field control. New alternative PM machine topologies with field weakening or hybrid excitation have been introduced in the literature for years to eliminate the effects of problems associated with the cumbersome field weakening techniques used in conventional PM machines. This paper reviews the field weakening of PM machines covered from machines perspective. Machine structures and features of each structure are clarified for both radial and axial airgap PM machines studied thus far. I. INTRODUCTION Demand for more compact, efficient and cheaper electric machines has grown tremendously during the last decade. Meanwhile, a great progress has been achieved not only in the development of permanent magnets but in the area of electric machine design and power electronics as well. Therefore, PM machines have been drawing more and more attention. Development of magnet technology has allowed increased power/torque density and efficiency of the PM machines. Especially with the use of NdFeB magne