紧固件宣传口号.doc

紧固件宣传口号 篇一：紧固件术语 手工焊接 manual welding 焊接螺柱 weld studs 双头螺柱 double end studs 等长双头螺柱 double end studs (clamping type) 六角头螺栓 hexagon head bolt 六角头精配螺栓（长螺纹）hexagon fitted bolts, long thread 六角头精配螺栓（短螺纹）hexagon fitted bolts, short thread 平垫圈组合件 washer assemblies with plain washers 弹簧垫圈组合件 single coil spring lock washer assemblies 外锯齿锁紧垫圈组合 serrated lock washer external teeth assemblies 六角头头部带孔螺栓 hexagon bolts with wire holes on head 细牙螺纹 fine pitch thread 全螺纹 full thread 六角头螺杆带孔螺栓 hexagon bolts with split pin hole on shank 六角头头部带十字槽螺栓 cross recessed hexagon bolts with indentation 六角头头部带内六角花形螺栓 hexagon lobular socket 六角法兰面螺栓 hexagon bolts with flange 六角法兰面螺栓-加大系列 hexagon flange bolts—Heavy series 活节螺栓 eye bolt 大半圆头方颈螺栓(马车螺栓) cup head square neck bolts with large head; mushroom head square neck bolts (carriage bolts) 小方头螺栓 square head bolts with small head T型方颈螺栓 T-head bolts with square neck T型双接头螺栓 T-head bolts with double nip 十字槽盘头螺钉 pan head screws with cross recess 十字槽球面中柱头螺钉 screws, cross recessed, thin raised cheese head 十字槽120°半沉头螺钉 screws, cross recessed, 120° raised countersunk head 内六角花形盘头螺钉 hexalobular socket pan head screws 内六角圆柱头螺钉 hexagon socket head cap screws 开槽圆柱头螺钉 slotted cheese head screws 开槽平端紧定螺钉 slotted sit screws with flat point 开槽锥端紧定螺钉 slotted set screws with cone point 开槽盘头螺钉 slotted pan head screws 开槽凹端紧定螺钉 slotted set with cup point 滚花平头螺钉 knurled thumb screws thin type 自攻螺钉和平垫圈组合件 tapping screw and washer assemblies with plain washers 螺栓 bolt 螺钉 screw 十字槽盘头螺钉 cross recessed pan head screw 外锯齿锁紧垫圈 serrated lock washer external teeth assemblies 锁紧垫圈 sealing washers 锥形锁紧垫圈组合件 countersunk serrated external toothed lock washer assemblies 锥形锯齿锁紧垫圈 countersunk serrated external toothed lock washers 十字槽半沉头螺钉 cross recessed raised countersunk head screw; countersunk raised head screws (common head style) with cross recess 十字槽沉头螺钉 countersunk flat head screws (common head style)with cross reces