FIELD EMISSION DISPLAY场发射显示器.pptVIP

(F E D)FIELD EMISSION DISPLAY DEEPAK GUPTA EC 3rd YR. 0800131034 PLAN OF PRESENTATION WHAT WHEN APPS. HOW ADV. CHARACTERISTICS FED FED is such a display that works a bit like a cathode-ray tube, except that electrons are emission procedure Instead of one cathode emission spraying of electron through number of hole is done HISTORY In 1968, Charles A. Capp Spindt at the Stanford Research Institute had the idea of fabricating a flat display using microscopic molybdenum cones singly or in arrays (FEA’s) This development was the enabling technology the concept for using FEA’s in a matrix addressed display (FED) Assembly of FED Device FED PACKAGING The field emission display screens are comprised of a thin sandwich. In this the back is a sheet of glass or silicon that contains millions of tiny field emitters which is the cathode. The front is a sheet of glass coated with phosphor dots, which is the anode. FED CHARACTERISTICS Comparing with the CRT displays the field emission displays has many advantages. They are: APPLICATION This technology could produce affordable large displays in the 20 to 40-inch diagonal range suitable for TVs.  DRAWBACKS a. Vacuum tubes do require maintenance. b. Current FEDs often suffer from variation in screen brightness across the display, and also within each pixel. c. Durability due to electrical discharge in the small gaps everywhere in FED prototypes. d. The killing problem was durability: the tips could not survive under severe conditions of arcing (i.e. electrical discharge) due to the small gaps everywhere in FED prototypes. * * * * * * Field emission displays, electrons coming from millions of tiny microtips pass through gates and light up pixels on a screen.This principle is similar to that of cathode-ray tubes in television sets. The difference: Instead of just one gun spraying