Final Year Project最后一年的项目.pptVIP

Research on more efficient DC-DC boost converters. An example of this lack of efficiency was observed when powering the calculator. At the start there was from 0.9milli- Amps being drawn from the capacitor into the Boost converter which had 0.8 volts applied across the input. At the end there was 0.3 volts applied across the DC-DC boost converter and 2.2 milli-Amps being drawn from it. This means the input power was between 0.72 milli-Watts down to 0.66 milli-Watts yet the output power was only 0.0297 milli-Watts. This is equal to 4.5 % efficiency. Further Research on battery charging profil