DEC-4.0f-UNIX系统远程诊断配置方法.docVIP

DEC 4.0f UNIX系统远程诊断配置方法 该说明存放路径：Accdep3-003 E:\上位机资料查询\安装说明\fix-3-001 1. 将modem 设置为自动应答方式： modem 接在windows 系统的机器上，运行超级终端程序 输入 ats0=1 (将modem 设置为自动应答方式) ats0=0 为非自动应答方式 ats0=3 为响铃三声后应答方式 输入 ats0=? 检查 modem 应答方式 DEC 4.0f UNIX 系统配置方法 将modem 连接在机器的串口上 (如 串口1) 2．1 进入超级用户方式 su 2．2 # netsetup 将出现以下画面 **** MAIN MENU **** 1 Configure Network Interfaces 2 Enable/Disable Network Daemons and Add Static Routes 3 Add/Delete Host Information 4 Display Network Configuration 5 Exit Enter the number for your choice: 2．3 输入 1 选择 Configure Network Interfaces 将出现以下画面 ***** CONFIGURE/DELETE NETWORK INTERFACES ***** You can configure or delete network interfaces. Configuration information is updated in /etc/rc.config and /etc/hosts. Choose configure or delete at the prompt. Enter whether you want to (c)onfigure or (d)elete network interfaces. If you are finished, press the RETURN key: 2．4 输入 c 选择 (c)onfigure 将出现以下画面 You want to configure interfaces. Is this correct [yes]? 2．5 输入 y 选择 yes 将出现以下画面 You will now be asked a series of questions about the system. Default answers are shown in square brackets ([]). To use a default answer, press the RETURN key. 2．6 回车 将出现以下画面 This machine contains the following network interfaces: tu0 sl0 Which interface do you want to configure [tu0]: 2．7 输入 sl0 选择sl0 将出现以下画面 You want to configure sl0. Is this correct [yes]? 2．8 输入 y 选择yes 将出现以下画面 Interface sl0 is a Serial Line Internet Protocol (SLIP) interface. Enter the hostname for SLIP interface sl0 []: 2．9 输入 modem 所连接的机器节点名(随便) 如 abc 将出现以下画面 The hostname for SLIP interface sl0 is abc. Is this correct [yes]? 2．10 输入 y 选择yes 将出现以下画面 Enter the Internet Protocol (IP) address for SLIP interface sl0 in dot notation []: 2．11 输入本机远方诊断用IP地址：192.9.22.1 将出现以下画面 The IP address for SLIP interface sl0 is 192.9.22.1. Is this correct [yes]? 2．12 输入 y 选择yes 将出现以下画面 Enter the IP address of the remote SLIP