湿式中强磁磨前抛尾磁选机.docVIP

湿式中强磁磨前抛尾磁选机 Wet medium intensity magnetic separator (tailings discarding before grinding) 产品优势Product advantages 1、磁场强度为250-450mT 2、筒体表面粘瓷或LNT耐磨橡胶，使用寿命长 3、大幅度抛除夹石提高铁入磨品位 1. Magnetic field intensity is 250-450mT. 2. Drum surface is covered with porcelain or LNT abrasion resistant rubber with long life expectancy. 3. Feeding iron grade is improved by greatly removing gangue. Contact us 0535-6302098 产品介绍产品特点产品应用产品原理技术参数feature Product application Product principle Technical parameter 产品特点features 1、磁场强度为250-450mT 2、筒体表面粘瓷或LNT耐磨橡胶，使用寿命长 3、大幅度抛除夹石提高铁入磨品位 4、大大提高处理能力，降低磨矿成本，经济效益非常客观 5、小的改变，大的惊喜 6、专用于磨前或自磨机排矿较粗矿粒(0-18mm)的预选抛尾covered with porcelain or LNT abrasion resistant rubber with long life expectancy. 3. Feeding iron grade is improved by greatly removing gangue. 4. Greatly improving the handling capacity, reducing milling cost, remarkable economic advantage. 5. Small revise brings big surprise 6. Specially used in preselecting and removing gangue when discharging coarse particles (0~18mm) 产品应用Product application球磨机的磨前预选或自磨机排矿的预先抛尾。used for preseparation of the ball mill. 2. It is used for removing tailings before the discharging of autogenous mill. 产品原理Product principle粉矿（18～0mm）给入磁选机槽体以后，在喷水管喷出水的作用下呈松散状态进入磁选区。磁性颗粒在磁系的磁场力作用下被吸在圆筒的表面上随圆筒一起向上运动，当磁性颗粒被圆筒带到卸料区时，冲洗水便将其冲进磁性产物槽中。非磁性产物在槽体内矿浆流的作用下，通过底板上的孔流入非磁性产物管中。After fine particle ores (18~0mm) are fed into the tank of magnetic separator, they enter magnetic selection area under the influence of the water flow spurted from sparge pipe. The magnetic particles are absorbed to the drum surface because of magnetism of magnetic body and rising with the drum. When magnetic particles are taken to the discharging area by drum, the wash water pushes them into the magnetic product trough. Under the action of ore pulp flow in the trough, the non-magnetic materials flow into non-magnetic product pipe through the hole of baseboard. 技术参数型 号 圆筒尺寸(mm) 筒体表面选矿区磁感应强度平均值（mT） 圆筒转速 分选粒度 处理能力(t/h) 电机型号 电机功率(kw) 重 量 CT2-66 φ600×600 25