35kV变电站一次部分设计毕业论文可编辑.docVIP

35kV变电站一次部分设计-毕业论文 The First Part of 35kv Converting Station Design 摘 要 随着工业时代的不断发展人们对电力供应的要求越来越高特别是供电的稳固性可靠性和持续性然而电网的稳固性可靠性和持续性往往取决于变电站的设计和配置一个典型的变电站要求变电设备运行可靠操作灵活经济合理扩建方便出于这几方面的考虑本论文设计了一个降压变电站 本次设计根据某国营企业的电力负荷资料作出了该公司 35KV10KV变电所的初步设计工厂总降压变电所及配电系统设计是根据各个车间的负荷数量和性质生产工艺对负荷的要求以及负荷布局结合国家供电情况解决对各部门的安全可靠经济技术的分配电能力问题毕业论文共分为六章主要对变电站进行了主接线设计负荷计算短路电流的计算和高压电气设备的选择本设计以实际负荷为依据以变电所的最佳运行为基础按照有关规定 和规范作出了满足该区供电要求的 35kV 变电所初步设计 设计中首先对负荷进行了统计与计算选出了所需的主变型号然后根据负荷性质及对供电可靠性要求拟定主接线设计设计中还进行了短路计算和对主要高压电器设备进行了选择与计算如断路器隔离开关电压互感器电流互感器等此外还进行了防雷保护的设计和计算提高了整个变电所的安全性另附主接线简图一张 关键词35KV 变电站 总体设计 Abstract With the industrial development of the times people of the power supply of the increasingly high demand especially the power supply stability reliability and consistency However power grid stability reliability and durative often depends on the design of substation and distribution A typical substation for substation equipment reliable running flexible operation reasonable economy convenient expansion Out of this a few aspects into consideration this paper designed a step-down transformer substation This design according to a state-run enterprise of electric power load data made the company 35KV10KV substation preliminary design factory total step-down substation and power distribution system design is based on the various workshops the number and nature of the load the production process on the load demand and load distribution and state power to resolve the various department of safety economy and technology distribution capacity graduation thesis consists of eight chapters mainly on the main wiring design of substation load calculation calculation of short circuit current and high voltage electrical equipment selection This design to actual load as the basis to the substation optimal operation for the foundation in accordance with the relevant provisions and norms the power supply was made to meet the requirements of the35kV substation preliminary design The design of the first load of stat