包装作业标准制订程序.doc

▓Engineering Directive(ED) □Engineering Specification(ES) □Manufacturing System(MS) Subject: 包裝作業標準制訂程序 Packing Standard Enactment Procedure Doc. No. 703-K060 Rev.:1 Effective Date: Page:01 of 03 1.0 目的 (Purpose) 1.1 建立包裝作業標準格式及制訂程序. Establish packing standard style and enactment procedure. 1.2 建立包裝作業標準之管理及維護程序. Establish packing standard management and maintenance procedure. 2.0 範圍 (Scope) 2.1 凡本公司所製造之產品, 其包裝作業標準之制訂皆適用之. Applicable all products our firm manufacture. 2.2 原則上, 同一 Project code 之產品, 可依不同之包裝方式分別制訂包裝作業標準. In principle, the same project code products enactment different packing standard depend on packing way. 3.0 責任 (Responsibility) 3.1 包裝作業標準統一由NB機構工程部各機種包裝工程師負責制訂. Packing standard will be enacted by the person in charge of packing each model NB Mechanical Engineering Department. 4.0 作業內容 (Activity Details) 4.1 制訂enactment: :  Subject: 包裝作業標準制訂程序 Packing Standard Enactment Procedure Doc. No.: 703-K060 Rev.: 0 Effective Date: Page:02 of 03 4.2 修改（Modify）:  Subject: 包裝作業標準制訂程序 Packing Standard Enactment Procedure Doc. No.: 703-K060 Rev.: 0 Effective Date: Page: 03 of 03 4.3 異常狀況處理quality deviation operation: 4.3.1 依 異常處理規範 (702-K012), 製程標準變更程序 (702-K002) 處理. Operate depending on “Quality Deviation Operation Standard“ , “In-process Standard Change Procedure“ 4.3.2 視需要發出 機構工程變更作業程序 (702-K003) 做為緊急生產之依據, 及跟催改善動作. Issue “Machinery Engineering Change Operation Procedure“ based on needs and urgent production. 4.3.3 未正式變更作業內容前, 暫不修改包裝作業標準. Don’t revise packing standard before change activity details formally. 4.4 格式: 4.4.1 Cover sheet: Release Notice 之 Cover sheet 填寫請參閱 WKS資料中心作業規范 (703-K001) 之文件表格填寫說明. Please consult the instruction of “WKS document center operation rules” (703-K001) be