反向旋转型双螺杆挤压机及传动系统设计.docVIP

毕 业任 务 书 一、题目及专题： 题目　　 　　 、专题　 　 二、课题来源及选题依据 三、本设计（论文或其他）应达到的要求： ④ 熟练绘制挤压机及传动系统总装图、部件图和零件图； ⑤ 能够熟练使用AUTO-CAD。 四、接受任务学生： 机械 班 　　姓名 五、开始及完成日期： 自20年月日 至201年5月日 六、设计（论文）指导（或顾问）： 指导教师　　　　　　　签名 签名 　　　　　　　签名 教研室主任 　　　　　　〔学科组组长研究所所长〕　　　　　　　签名 　　 　　系主任 　　　　　　签名 2012年1月日摘 要 关键词：传动系统；挤压混炼；反向旋转双螺杆挤压机 Abstract In this page, the market need of the extrusion press and the condition of the production is analyzed first. And from theoretically, we studied the technique possibility to produce the foods. We expounded the specialty and working elements of the twin-screw extruder and pointed working flow to produce the foods with twin-screw extruder. In the base of the extruders in existence, we referenced the mature means of extruder design in our country and abroad and based the characteristic of foods and the special working craftwork requires, then, we designed the key structure of extruder. In this text, we introduced the structure design of extruder in detail, particular to the major parts: assignment tank, screw, barrel and systems analysis and calculating. To those important transmission parts: the big gear and the small gears in assignment tank, strip wheel, driving spindle, key, we made a design and check the intensity. And we calculate and check the carrying capacity of the bearing particularly. We also refer to the choosing requirements of the accessories: heating and cooling system, die, knife equipment, and made a simple design. In the end of the text, the installing, operation, controlling and repairing of the extruder were also introduced. Key words： The transmission system；extrusion mixing and shaping；Counter-rotation twin -screw extruder 目 录 摘 要 III Abstract IV 目 录 V 1 绪论 1 1.1 挤压机技术应用及分析 1 1.2 国内外生产现状 1 1.2.1 国内发展 1 1.2.2 国际上主要有以下方面 1 1.3 挤压机生产食品的可行性分析 2 1.4 挤压技术在口