沙柳材蒙脱土复合材料的制备与阻燃性能的研究-材料加工工程专业论文.docxVIP

pressing temperature. The Salix Sammophila / MMT Shaving board which produced of Montmorillonite modified with UF as the intermediate mediumand. The main order is glue content, pressing time, pressing temperature, the Scattered concentration. The ideal process conditions: the Scattered concentration of 5%, 12% resin content, pressing temperature was 185 ℃, pressing time 7min. 4. The physical properties of shaving board which prepared UF / MMT composite materials previously and mixed with Salix better than the shaving board that prepared Salix Sammophila / MMT composite materials previously and then mixed with glue. The physical properties of shaving board which using the first method can satisfy the requirement for structural panels used as a structural plate in dry conditions regulated by GB / T 4897.4-2003. The physical properties of shaving board which using the second method can satisfy the requirement for a panel of furniture and interior decoration requirements in dry conditions regulated by GB / T 4897.3-2003. Key Words: Salix Psammophila; Montmorillonite; Nanocomposite; Shaving board ; Urea-Formaldehyde Directed by: Prof. FENG Liqun Applicant for Master degree: ZHANG Ying （Material Processing Engineering) (College of Material Processing Engineering. Inner Mongolia Agricultural University. Hohhot 010018. China) 目 录 HYPERLINK \l _bookmark0 1 绪论 1 HYPERLINK \l _bookmark1 1.1 引言 1 HYPERLINK \l _bookmark2 1.2 国内外木质材料阻燃性能的研究现状 1 HYPERLINK \l _bookmark3 1.3 现有木质材料阻燃方法存在的问题 2 HYPERLINK \l _bookmark4 1.4 本论文的研究目的与意义 3 HYPERLINK \l _bookmark5 1.5 研究内容与论文构成 3 HYPERLINK \l _bookmark6 1.5.1 研究内容 3 HYPERLINK \l _bookmark7 1.5.2 技术路线 4 HYPERLINK \l _bookmark8 2 沙柳材/蒙脱土复合材料的制备及阻燃性能研究 4 HYPERLINK \l _bookmark9 2.1 试验材料与仪器 5 HYPERLINK \l _bookmark10 2.2 有机蒙脱土的制备 5 HYPERLINK \l _bookmark11 2.3 沙柳材/蒙脱土复合材料的制备 6 HYPERLINK \l _bookmark12 2.4 测试与表征 6 HYPERLINK \l _bookmark13 2.5 结果与讨论 7 HYPERLINK \l _bookmark14 XRD 分析 7 HYPERLINK \l _bookm