撕膜机之剥料构的设计与仿真毕业论文.docxVIP

毕业设计说明书（论文）中文摘要近年来，随着手机等行业的兴起，手机贴膜等产品的需求与日俱增，撕膜机在这样的情况下也迎来了它的春天。撕膜机是一种可以安全快捷地将膜从冶具上撕下来的机器。本文即是根据需求，对撕膜机中的剥料机构进行研究设计。根据原始的数据和生产要求，对撕膜机中的剥料机构进行了解，并对剥料机构中的重要零件进行了选型和计算，设计了剥料机构的具体结构，选用了合适的气缸和线性滑轨，并通过他们对其他零件进行设计，而且画出了他们的三维和二维图，还对他们的运动进行了仿真。剥料机构是撕膜机的重要组成部分，它的良好设计能给撕膜机带来更好的工作效果。关键词撕膜机 计算选型 结构设计 绘图 仿真毕业设计说明书（论文）外文摘要Title Design and Simulation of tear film strip feeding mechanism of the machineAbstractIn recent years, with the increasing demand for mobile phones and other sectors rise, mobile phones and other products of the film, tear film machine in this case it also ushered in the spring. Tear film machine is a safe and efficient manner on the film torn from the rule of the machine. This paper is based on the needs of the tear film machine stripping material research and design institutions. According to the original data and the production requirements of the tear film peeling machine feeding mechanism to understand, and stripping the feeding mechanism of the important parts for the selection and calculation, design concrete structures stripping feeding mechanism, the choice of the right cylinder and linear rails, and through them to other parts of the design, and to draw their three-dimensional and two-dimensional map, but also on their sport simulation. Strip feeding mechanism is an important part of the tear film machine, its well designed to give a better tear film machine work results.KeywordTear film machine Calculated Selection Structural Design Draw Simulation本科毕业设计说明书（论文） 第 Ⅰ 页 共 Ⅰ 页目 录1 绪论…………………………………………………………………………………11.1撕膜机的概述……………………………………………………………………11.2 撕膜机的工作原理………………………………………………………………21.3 撕膜机的一个工作流程…………………………………………………………21.4 本课题研究的目的和意义………………………………………………………22 设计方案与工作原理………………………………………………………………32.1 总体设计…………………………………………………………………………32.2剥料机构的工作理………………………………………………………………32.3 剥料机构的设计思路……………………………………………………………43 气缸的选择…………………………………………………………………………43.1 气缸的介绍………………………………………………………………………43.2气缸结构的选择…………………………………………………………………53.3气缸缸径的计算…………………………………………………………………7