TS1总结完全冲刺版.docVIP

1、R22的loopback 0要能telnet R23的loopback 0,R22和R23之间已经配置好做了ospf区域验证,题目没有要求说不能用静态的映射。R22预配:interface Serial1/0 ip address 52 encapsulation frame-relay ip ospf message-digest-key 1 md5 cisco (ospf md5 区域认证) no frame-relay inverse-arp (预配的时候关闭自动映射，所以要手工配置map) frame-relay lmi-type cisco (本链路有效) frame-relay map ip 22 broadcast(对端地址、本地DLCI号、broadcast学习ospf路由)(预配：map 的IP地址和DLCI号是错误的，22和23反了） ip ospf network broadcast（ip ospf network point-to-point）两边必须一样！R23：预配 interface Serial1/0 ip address 52 encapsulation frame-relay ip ospf message-digest-key 1 md5 cisco no frame-relay inverse-arp cloc