基于单片机的数显式智能压力开关的设计.doc

PAGE PAGE 54摘 要随着传感器检测技术的发展，传感器集信号采集、信号处理输出功能于一身，精度高稳定性好的压力检测系统已成为生产实践发展的迫切需要。其中压阻式压力传感器以其灵敏度高、动态响应好、易于微型化等特点，而获得广泛应用。单片机是随着超大规模集成电路技术发展而诞生的，由于它体积小、功耗低，控制能力强、扩展灵活、微型化和使用方便等优点，以形式多样的控制系统和数据采集系统，广泛应用于工业检测和控制中。本设计从当前工业压力采集显示开关现状出发，设计一种基于AT89C51单片机的编程控制仪器，该系统集压力采集显示，过载报警并处理于一体。本设计对压力传感器的选型，信号放大和滤波，LCD液晶显示电路以及单片机的接口电路等技术进行了分析和设计，并用仿真软件Proteus对系统进行了整体调试，实现了预定功能。关键词：传感器 单片机 信号处理 仿真ABSTRACTWith the development of sensor detection technology, it makes the signal acquisition and signal processing output in-one. The pressure monitoring system about high precision and stability has become the urgent need for the production practices. The pressure sensor with its high sensitivity, dynamic response, miniaturization and other features, is widely available. With the development of ultra-large-scale integrated circuit technology, the Microcontroller was born. Due to its small size, low power consumption, control ability, flexible expansion, miniaturization and ease of use, it is used in industrial inspection and control widely in the various forms of control systems and data acquisition system.According to the status about the pressure display switch in the current collection industrial, the design makes a programming control instruments based on AT89C51.The system gathers pressure of display and overload alarm in one. The design that analyses the selection pressure sensor, the signal amplified and filter, the LCD display circuit and microcontroller interface circuit. The design adopts Proteus as the simulation platform and achieves the intended function.Keywords: transducer SCM signal processing simulation目 录 TOC \o 1-3 \h \z \u HYPERLINK \l _Toc358697683 摘 要 PAGEREF _Toc358697683 \h I HYPERLINK \l _Toc358697687 ABSTRACT PAGEREF _Toc358697687 \h II HYPERLINK \l _Toc358697691 第1章 绪论 PAGEREF _Toc358697691 \h 1 HYPERLINK \l _Toc358697692 1.1 概述 PAGEREF _Toc358697692 \h 1 HYPERLINK \l _Toc358697693 1.2 分类 PAGEREF _Toc358697693 \h 2 HYPERLINK \l _Toc358697703 1.3 电子式压力开关原理