毕业设计（论文)鼠标底座注射模设计（全套图纸三维).docVIP

3 毕业设计说明书(论文)题 目： 鼠标底座注射模设计 摘 要本次设计的是一种鼠标下盖的注塑模具设计，该课题是设计制作注塑模具，分析可以知道该零件的外形比较小，因此采用浇注系统使用潜伏式侧浇口模式，一模具两个型腔，单分型面注射成为本次设计的结构模式。本次设计的具体操作如下：首先先是对于本次所要设计的塑件性能进行一系列的分析。其中包括了对塑件结构的尺寸分析和所需要的塑件材料各项分析。然后是是对本次设计的塑件设计一个合理的方案。其中包括了多塑件分型面的确定和型腔数量的确定。对于该模具的设计，我们先要选定一台符合本次设计要求的注塑机。然后是设计该塑件的浇注系统。接着，是对成型零部件的结构设计和工作尺寸的计算。以及对排气系统和冷却液系统的优化。最后是对于整个模具的装配的要求和过程，并且使用CAD软件绘制了本次设计的模具的装配图和各个零件图。关键词：鼠标下盖；潜伏式；侧浇口全套图纸三维加153893706AbstractThe design of the injection mold design of a mouse cover, the topic is the design of injection mould, analysis can know the shape of the parts is relatively small, so the gating system using latent side gate mode, a mold two cavity, single parting surface injection into the design of the structure model. The specific operation of the design are as follows: the first is the need to design the plastic properties of a series of. Including the analysis of the structure of plastic parts of the size analysis and the plastic material. Then is the design of plastic parts to design a reasonable scheme. Including the determination of parting surface and cavity number.For the design of the mould, we must first choose a meet the design requirements of the injection molding machine. Then the design of gating system of the plastic parts. Then, is the structure design and calculation of the size of molding parts. And the optimization of the exhaust system and cooling system. Finally, the entire mold assembly and assembly process, and use CAD software to draw the design of the mould and parts diagram.Keywords: mouse cover; tunnel; the side gate目 录TOC \o 1-3 \h \u HYPERLINK \l _Toc18206 摘 要 PAGEREF _Toc18206 I HYPERLINK \l _Toc10988 Abstract PAGEREF _Toc10988 II HYPERLINK \l _Toc1567 目 录 PAGEREF _Toc1567 III HYPERLINK \l _Toc26660 第一章 前言 PAGEREF _Toc26660 1 HYPERLINK \l _Toc4328 1.1我国塑料模具的发展现状 PAGEREF _Toc4328 1 HYPERLINK \l _Toc27920 1.2国外塑料模的发展状况 PAGEREF _Toc27920 3 HYPERLIN