说明书手机盖造型及其注射模具的设计.docVIP

黄河科技学院毕业设计说明书 第 PAGE III 页毕业设计说明书手机盖造型及其注射模具设计院 系 名 称 工学院机械系 专 业 名 称 材料成型及控制工程 2012年 5 月 08 日手机盖造型及其注射模具设计摘 要塑件的成型工艺性主要包括塑件的壁厚、斜度和接触圆角及抽芯机构等。本文从手机盖的形状尺寸、精度及使用性能要求等方面对塑件进行了注射成型工艺的可行性分析。通过塑件成型工艺性的分析来设计注射模具并确定模具分型面、型腔数目、浇口形式、位置大小；其中确定型芯和型腔的结构是模具设计的重点内容。此外还分析了模具受力并进行了脱模机构的设计，抽芯机构的设计，合模导向机构的设计，冷却系统的设计等。最后绘制完整的模具装配总图和主要的模具零件图及编制成型零部件的加工工艺卡片，可供实际使用时参考。关键词：分型面，浇口，型腔，型芯，抽芯机构，脱模机构 Mobile phone cover modelling and injection mold design AbstractPlastic parts forming technology of plastic parts mainly includes the wall thickness, slope and contact edges and core-pulling mechanism, etc. This article from the shape of the mobile phone cover size, the precision and the use of performance requirements of the plastics injection molding process of feasibility analysis. Through the analysis of the plastic parts molding technology to design the injection mould and determined the mold parting surface, cavity number, gate form and position size; One sure cores and mold structure is the main content of the mould design. In addition, it also analyzes the mold force and demoulding mechanism design, core-pulling mechanism design, the design of steering mechanism molmerged, cooling system design, etc. Finally draw complete the mold assembly layout and the main mould parts diagram and molding parts processing technology of card, available for reference when actual use.Key phrase: Parting surface, Runner, Cavity, Cores, Core-pulling mechanism, To take off the touch institutions目 录1 绪论….………………………………………………………………………………... 1 1.1本次设计的内容…………………………………………………………….…… 1 1.2设计要求…………………………………………………………………….…… 12 塑件分析……………………………………………...…………………………….… 23 塑件材料的成型特性与工艺参数…………………...………………………….…… 33.1ABS塑料的特性 ………….………………………...………………….…….……. 3 3.2成型特性……………………………………………………………………...…..… 33.3工艺参数……………………………………………………………………………. 43.4塑料制件的结构工艺性………………………...………………………..….…….