金相试样切割机的的设计.docVIP

PAGE PAGE 19设计题目：金相试样切割机的设计摘 要金相试样HYPERLINK 切割机主要用于金相试样的截取和各种材料的下料、切口等，在冶金、汽车、航空航天等制造业中应用极为广泛。20世纪90年代后，金相制样技术发展极为迅速，金相试样切割机作为金相取样设备也取得了很大的进步。本设计通过对金相试样切割机的整体造型、机械结构和控制系统进行了分析，完成了切割机主体结构的设计，控制系统采用了铣床导轨原理，实现了低成本和手动化。最后确定切割机的装配总图。通过此次设计，掌握了相关设计的主要步骤，并对于Pro—E软件应用方面有了进一步的提高。关键词：金相试样切割机，机械设计，手动控制，控制系统，低成本Metallographic sample cutting machine designAbstractMetallographic sample cutting machine mainly used for the interception of metallographic specimens and cutting material, incision, etc., in the metallurgical, automotive, aerospace and other manufacturing industries in a wide range of applications. After the 20th century, 90s, metallographic sample preparation is extremely rapid technological development, metallographic metallographic specimen cutting machine as the sampling equipment has also made great progress. The design of metallographic sample cutting machines overall design, mechanical structure and control system analysis, completed the main structure of cutting machine design, control system uses the principle of the rail milling machine to achieve a low-cost-based and manual.  Cutting machine to finalize the general layout of the assembly. With this design, is in control of the main steps related to the design and the Pro-E software applications has been further improved.Keywords： Metallographic sample cutting machines, Mechanical design, Manual control, Control systems, Low-cost目 录 TOC \o 1-3 \h \z \u HYPERLINK \l _Toc230950333 1 引言 PAGEREF _Toc230950333 \h 1 HYPERLINK \l _Toc230950334 2 设计要求 PAGEREF _Toc230950334 \h 1 HYPERLINK \l _Toc230950335 3 切割机的总体设计过程 PAGEREF _Toc230950335 \h 2 HYPERLINK \l _Toc230950336 3.1 电动机的选择 PAGEREF _Toc230950336 \h 2 HYPERLINK \l _Toc230950337 3.1.1 选择电动机类型和结构形式 PAGEREF _Toc230950337 \h 2 HYPERLINK \l _Toc230950338 3.1.2 电动机的参数选择 PAGEREF _Toc230950338 \h 2 HYPERLINK \l _Toc230950339 3.2 传动机构的设计 PAGEREF _Toc230950339 \h 3 HYPERLINK \l _Toc230950340 3.2.1 轴的计算 PAGEREF _Toc230950340 \h 3 HYPERLINK \l _Toc23095034