控制混凝土内部缺陷的验收规范.docVIP

控制混凝土内部缺陷的验收规范 清水混凝土表面缺陷主要为表面平整度、轴线位置不满设计要求、表面蜂窝、麻面、有气泡密集区，表面缺损，非受力钢筋露筋。小孔洞、单个气泡等；混凝土内部缺陷主要指混凝土浇筑过程中，混凝土振捣质量差，造成混凝土内部架空和孔隙率偏大的缺陷，内部缺陷应在混凝土浇筑过程中及时发现，及时清除。 Concrete surface defect is mainly for the surface roughness and axis position with the design requirements, surface voids, pits, bubble concentration areas, surface defect, and the reinforced bar. Small holes, the individual bubbles, etc.; Inside the concrete defects mainly refers to the concrete pouring process, the poor quality of concrete vibratory, caused concrete internal overhead and large porosity defects, internal defects shoul