毕业论文（设计）城郊煤矿3.0Mt-a新井设计.docVIP

中国矿业大学毕业论文答辩及综合成绩答 辩 情 况提 出 问 题回 答 问 题正 确基本正确有一般性错误有原则性错误没有回答答辩委员会评语及建议成绩：答辩委员会主任签字： 年 月 日学院领导小组综合评定成绩：学院领导小组负责人： 年 月 日摘 要本设计包括三个部分：一般部分、专题部分和翻译部分。一般部分为城郊煤矿3.0 Mt/a新井设计。城郊煤矿位于河南省永城市，交通较为便利。井田倾向（东西）长约8 km，走向（南北）长约8 km，井田总面积为39.2 km2。主采煤层为3、2号煤层，平均倾角为6°，煤层平均厚度为5.93 m。井田地质条件较为简单。井田工业储量为300Mt，矿井可采储量349Mt 。该矿井服务年限为93 a，涌水量不大，矿井正常涌水量为250 m3/h，最大涌水量为380 m3/h。矿井瓦斯涌出量较低，为低瓦斯矿井。井田为立井两水平开拓；长壁放顶煤采煤法；矿井通风方式为中央并列式。矿井年工作日为330d，工作制度为“三八”制。一般部分共包括10章：1.矿区概述及井田地质特征；2.井田境界和储量；3.矿井工作制度及设计生产能力、服务年限；4.井田开拓；5.准备方式-盘区巷道布置；6.采煤方法；7.井下运输；8.矿井提升；9.矿井通风与安全技术；10.矿井基本技术经济指标。专题部分的题目为关于充填条带开采的应用分析，分析了充填条带开采的方法，并举例论证了充填条带开采的可行性。翻译部分主要内容基于富有限元方法的全锚锚杆模型，英文题目为：Modelling of fully grouted rock bolt based on enriched finite element method关键词：立井；带区；综放；架线电机车运输；中央并列式通风ABSTRACTThis design includes of three parts: the general part, special subject part and translated part.The general part is a new design of chenjiao mine.chenjiao mine lines in north-west of Yongcheng in Henan province. The traffic of road and railway is convenience to the mine. The width of the minefield is 8.00 km ,the width is about 8.00 km，well farmland total area is 39.2km2.The two is the main coal seam, and its average dip angle is 6 degree. The thickness of the mine is about 5.93 m in all. The proved reserves of the minefield are 300 Mt. The designed productive capacity is 3.0 Mt percent year, and the service life of the mine is 93 years. The normal flow of the mine is 250 m3 percent hour and the max flow of the mine is 1200 m3 percent hour. The mineral well gas gushes the deal lower, for low gas mineral well.The well farmland is two levels in vertical shaft development;the cole mine is the longwall mining;the centralized ventilation.The working system “three-eight” is used in the chenjiao mine. It produced 330 d/a.This design includes ten chapters: 1.An outline of the mine field geology;