三防漆涂覆工艺规范A（中英文）.docVIP

修订履历Updated History 序号No. 原内容Original content 修订后updated 旧版Rev. 修订人updated by 修订日期Date 目的purpose： 规范本公司所有类型PCBA板涂覆材料工艺要求、质量要求；确保产品电器性能优良、外表美观、抗冷 热冲击、防霉、防湿，还应具有柔韧性和阻燃性。Standard process requirements and quality requirements for all types of PCBA in our company; ensure the electrical excellent performance, beautiful appearance, cold resistance，thermal shock, mildew proof, damp proof, but also should have the flexibility and flame retardant　　　 范围scope:Suitable for PCBA process of our hand coating, automatic coating, dip coating. 权责: 研发部：根据产品可靠性要求选择丙烯酸类(AR)、聚氨脂类(UR)、环氧树脂类(ER)、有机硅改性树脂、有机硅胶类(SR)的涂料，并纳入到BOM中。R D department: according to the products reliability requirements select acrylic (AR), polyurethane (UR), epoxy resin (ER), silicone modified resin, silicone rubber (SR) coating, and write into the BOM. 工程部：制定和指导涂覆工艺的流程，确保产品涂覆后的可靠性。Engineering Department: develop and guide the coating process, to ensure the reliability of coated products . 品质部：对涂覆产品可靠性评估及监测。quality department: evaluate the coated product reliability assessment and monitoring 生产部：严格按涂覆工艺控制规范作业，如有不良及时反应到工程、品质。production department: in operating according to the standard strictly , feed back information to quality and engineering department 定义: Definition 三防：防霉菌、防湿热、防盐雾。three proof: anti fungal, anti heat, anti salt fog. 内: Content 涂覆工艺分类：coating process classification: 刷涂法是最简单的涂覆方法。通常用于局部的修补和维修，也可用于生产，一般是涂覆质量要求不是很高的，我司简易采品采用刷涂。brush coating method is the simplest coating method:. Usually used to repair and local repair, can also be used for simple production, usually coated the products of not high quality requirements. simple production in our company apply coating by brush. 浸涂法从涂覆工艺初期至今，一直有较广泛的使用，适用于需完全涂覆dipping coating method: since the early coating process, It has been used widely, and It is applicable to the fully coated products. 喷涂法是业界最常用的涂覆方法，又分为机器自动喷涂和手工喷涂两种自动涂覆方法spraying method: it is the most commonly method of coating in industry, There are two method of automatic and manual spraying