VCL-MX 2Mbps E1, Drop-Insert Voice and Data Multiplexervcl-mx 2Mbps的E1，下降插入话音与数据多路复用器.ppt

VCL-MX, E1 Voice Data Drop-Insert Multiplexer Application # 07 VCL-MX, E1 Voice Data Drop-Insert Multiplexer Application # 08 Continue... VCL-MX, E1 Voice Data Drop-Insert Multiplexer E1 Interface (Main Link) Technical Specifications Number of Interfaces 2 Conformity (Electrical) G.703 Frame Structure As per ITU (CCITT) G.704 Signaling Channel Associated Signaling PCM Sampling Rate 8000 Samples/sec Encoding Law A Law as per ITU (CCITT) Bit Rate 2048 Kbps ± 50 ppm Code HDB3 Nominal Impedance 120 W balanced/75 W unbalanced Peak Voltage of a mark For 120 W Balanced interface 3.0 V ± 0.3 V 75 W Unbalanced interface 2.37 V ± 0.237 V Continued from E1 Interface (Main Link)... VCL-MX, E1 Voice Data Drop-Insert Multiplexer Peak Voltage of a space for 120 W Balanced interface 0V ± 0.3 V 75 W Unbalanced interface 0V ± 0.237 V Nominal Pulse Width 244 ns Pulse Mask As per ITU (CCITT) Rec. G.703 Output Jitter 0.05 UI (in the frequency range of 20Hz to 100KHz) Permissible Attenuation 6 dB at 1 MHz Return Loss at 51.2 KHz to 102.4 KHz 12dB 102.4 KHz to 2048KHz 18dB 2048KHz to 3072 KHz 14dB Jitter Tolerance As per ITU (CCITT) G.823 Loss and recovery of frame alignment As per clause 3 of ITU (CCITT) G.732 Loss and recovery of multiframe alignment As per clause 5.2 of ITU (CCITT) G.732 Number of Channels per Card 2 Interface Type FXO, FXS, 2W/4W, EM Maximum Number of Channels 30 Transmission performance Fully Compliant to ITU (CCITT)  G.712 specification Line Impedance 600 W (900 W optional) Voice Channel Frequency 300Hz-3400Hz Insertion Loss -2.0dB Nominal (User adjustable) Idle Channel Noise ? - 65dB Return Loss 300Hz - 600Hz - 12dB, 600Hz - 3400Hz - 15dB Longitudinal Balance ? 46dB between 300Hz to 3400Hz Ring Frequency 25Hz (20Hz, Optional)