本文介绍了一种应用两个电机驱动的六足式步机器人-大学学士学位论文.doc

xx科技大学学士学位论文PAGE PAGE II摘 要本文介绍了一种应用两个电机驱动的六足式步行机器人,并对该机器人的运动机理与步态进行了分析,经样机实验,所设计的机器人可实现前进、后退、遇障转弯等功能,具有结构简单,控制便捷,行走稳定的特点。基于仿生学原理,应用连杆机构学中的Robert原理,设计出一连杆轨迹能较好地近似于机器人理想足部轨迹的四杆机构，选择足部运动曲线并在图谱上找到该曲线，以确定四杆机构的各个参数。由参数和电动机的输出转矩就能确定足部的线速度和加速度。并通过PRO/E软件,对用这一连杆机构作为腿部机构的六足机器人进行了前进和转弯步态建模，并对它进行了稳定裕量分析，包括静力学分析和动力学分析。针对这种腿部结构设计了六足的行走方式,通过对12个步进电机的控制,采用三角步态,实现了六足机器人的直行功能。仿真及试验证明,这种结构能较好地维持六足机器人自身的平衡,并且对今后更深入地研究六足机器人抬腿行走姿态及可行性,具有较高的参考价值。关键词：六足机器人；行走步态；运动原理；稳定性；四杆机构abstractThis paper introduced a six-legged walking robot propelled by two electromotors,and analyzed the robots kinetic mechanism and walking style.Proved by the model test,the robot is capable of actions such as forwarding,backwarding and veering in the case of obstruction.The robot demonstrates such advantages as simple structure,comfortable control and stable performance of pacing.Based on the principle of bionics,this paper designs a four-linked mechanism using Robert principle,which can approximate the ideal trace of robots leg ,choose the sport curve of the foot department, then check to find out that curve on the diagram, the old ability but locations can make sure four each parameters of the pole structure, can make sure the line speed and accelerations of the foot department from the exportation dint of the parameter and electric motor. Some simulations about the hexapod robot which uses the six-linked mechanism as its leg are made， and carried on the stability to it analysis, include the quiet mechanics analysis and dynamics analysis.A hexapod walking mode was designed according to this structure.By controlling 12 step motors straight walking function of the hexapod robot has been implemented with tripod gait movement.Simulation and experiment show that this structure can keep the hexapod robot bodys balance better,providing high reference value to research the advantage and feasibility of leg-raising walking gesture.Keyword: six foot robot; Tread the appearance of walk; The sport principle; Stability; Fou