金士顿U盘盖的注塑模具设计-U盘盖外壳塑料注射模说明书.doc

摘要PAGE 122PAGE 32毕业设计说明书课题名称： HYPERLINK javascript:; U盘盖注塑模具设计 学生姓名 学 号 所在学院 专 业 班 级 指导教师 起讫时间：　 年　月　日～　 年　月　 日 PAGE \* MERGEFORMAT PAGE \* MERGEFORMAT 2 PAGE \* MERGEFORMAT PAGE \* MERGEFORMAT I摘 要国内外经济快速发展的今天，对塑料模具设计、使用和研究都是很普遍的，本次设计我们在了解零件的性能和功用的前提下，对其工艺性能和尺寸需要保证的精度进行了分析。权衡了塑件的外形尺寸。本次的模具采用一个模具四个成型腔，进料口开设在侧面，注射机的型号采用HTF80XB，并且还要具有冷却系统。拥有了合理的加工步骤，利用二维CAD和三维PROE绘制总的装配图和主要的零件图。在设计说明里面，我采用了比较简便的语言和示意图，对其进行了在分析，所以就得到了合适的设计。 关键词：塑料模具；塑件；注射机；冷却系统AbstractToday, the rapid economic development at home and abroad , The use of plastic mold design and research are very common, We know in part of plastic in the design of performance and function under the premise of process performance and size need to ensure the accuracy are analyzed. Balanced the overall dimensions of plastic parts. This mould uses two into a mold cavity, The inlet opening on the side, Injection machine model used HT80W1×B，and will have a cooling system. Have the reasonable processing steps, using 2 d CAD and 3 d PROE map the total assembly drawing and main parts.In design specification, I used the simple language and schematic diagram, for the analysis was carried out, so they got the right design.Keywords: Plastic mould Plastic parts Injection machine The cooling system目录TOC \o 1-3 \h \u HYPERLINK \l _Toc420515930 摘 要 PAGEREF _Toc420515930 \h I HYPERLINK \l _Toc420515931 Abstract PAGEREF _Toc420515931 \h 1 HYPERLINK \l _Toc420515932 绪论 PAGEREF _Toc420515932 \h 4 HYPERLINK \l _Toc420515933 1.1 塑料简介 PAGEREF _Toc420515933 \h 4 HYPERLINK \l _Toc420515934 1.2 注塑成型及注塑模 PAGEREF _Toc420515934 \h 4 HYPERLINK \l _Toc420515935 1 模具工艺规程的编制 PAGEREF _Toc420515935 \h 7 HYPERLINK \l _Toc420515936 1.1 塑件的工艺性分析 PAGEREF _Toc420515936 \h 7 HYPERLINK \l _Toc420515937 1.1.1塑件原材料的分析 PAGEREF _Toc420515937 \h 7 HYPERLINK \l _Toc420515938 1.1.2塑件的结构和尺寸几表面质量的分析 PAGEREF _Toc42051593