CATIA马鞍面教程.pptVIP

IBM Product Lifecycle Management Solutions / Dassault Systemes Speaker Text IBM Product Lifecycle Management Solutions / Dassault Systemes Reverse Engineeringsurface reconstruction Consumer goods division Setting the environment Setting the environment Open the starting part: File/Open Select file: 00Saddle-start Enter a DSE workbench Start/Digitized Shape Editor Setting the environment Choose the current open body Right-click Digit.data Select Define In Work Object Step 1 : prepare digitized data Step 1: prepare digitized data Import cloud Import Choose format cgo Select file: 00Saddle-digit.cgo Apply OK Time saver: you can also recall the stl file to skip filtering and tesselation phases. In this case skip next page of the script. Step 1 : prepare digitized data Filter the cloud of points Filter Select the cloud Choose Adaptative Chord value = 0.01mm Apply OK Tesselate the cloud Tesselate Select the cloud Activate 3D Mesher Deactivate Sag Deactivate Neighborhood Activate Shading Deactivate triangles Apply OK Step 1 : prepare digitized data Hide the imported cloud Create the middle section of the cloud Planar section Select the cloud Number = 1 Direction = XZ Drag the green manipulator to move the plane Right-click the manipulator to access Edit menu Enter Y = 0 and Close Apply OK Step 1 : prepare digitized data Keep half of the symmetric part Top view Activate Mode : trap Type : rectangular Select the cloud Select 2 points as shown OK Step 2 : create curves Step 2 : create curves Open a QSR workbench Start/Shape/Quick Surface Reconstruction Visualize a character line segmentation by slope criterion Select the cloud Select direction YZ OK Step 2 : create curves Create a planar section on character line Planar section Select cloud Direction = YZ Drag section to position of character line Apply OK Delete the character line Step 2 : create curves Left view Change privileged plane Right-click the compass Make XZ the privileged pla