得B2与B3点BE是运动已知构件.pptVIP

4-11 Design a crank-rocker mechanism ABCD to move a line EF on the coupler BC from position E1F1 to position E2F2 and then to position E3F3. xA=0. yA=0. xD=100mm. yD=0. xE1=2.18mm. yE1= -15.1mm. xE2= -3.19mm. yE2=-56.8mm. xE3=67.5mm. yE3= -32.8mm. ?E1F1=61.7?. ?E2F2=73.4?. ?E3F3=108.5?. LEF=125mm. Find the required moving revolute centres B1 and C1 on the coupler. 4-12 Design a revolute four-bar linkage ABCD so that a point E on the coupler BEC will pass through the three points, E1, E2 and E3. B1、A and D have been specified. xA=0. yA=0. xD=100mm. yD=0. xB1=44.2mm. yB1=22.2mm. xE1=50.4mm. yE