10 kv干式变压器温度场计划及影响因素了解.pdfVIP

Smart Grid 智能电网, 2017, 7(3), 161-168 Published Online June 2017 in Hans. /journal/sg /10.12677/sg.2017.73018 Temperature Field Calculation and Influencing Factors Analysis of 10 kV Dry-Type Transformer 1 2 1 1 1 1 Chunli Li , Junfeng Yao , Li Cai , Qian Huang , Wenliang Nie , Gang Qiu 1 College of Electronic Information Engineering, Chongqing Three Gorges University, Chongqing 2 State Key Laboratory of Power Transmission Equipment System Security and New Technology, School of Electrical Engineering, Chongqing University, Chongqing st th th Received: May 21 , 2017; accepted: Jun. 4 , 2017; published: Jun. 7 , 2017 Abstract A multi-physics model of 10 kV dry-type transformer is established based on the heat transfer theory, including 2D and 3D model that are able to characterize the solid heating and conjugate heating. The calculation method of the 10 kV dry-type transformer losses is determined; trans- former temperature field distribution in different external ambient temperature is obtained. Based on the temperature distribution, the real-time operating conditions and the maximum op- erating temperature when other failures occur are ensured, which provide a theoretical basis for transformer condition monitoring and thermocouple embedded. Keywords Heat Transfer Theory, Dry-Type Transformer, Loss, Temperature Field, Condition Monitoring 10 kV干式变压器温度场计算及 影响因素分析 1 2 1 1 1 1 李春莉 ，姚俊峰 ，蔡 黎 ，黄 倩 ，聂文亮，邱 刚 1重庆三峡学院电子与信息工程学院，重庆 2重庆大学电气工程学院，输配电装备及系统安全与新技术国家重点实验室，重庆 收稿日期：2017