abb tb82tc变送器样本.pdfVIP

Data sheet DS/TB82-EN Rev. F TB82 Conductivity transmitters 2-Wire Loop-powered transmitters that reduce installation costs in hazardous areas Intuitive user interface Large, Easy-to-Read Display — Easy to use menus guide the operator through set-up, — Shows primary measurement along with user-selectable calibration and maintenance secondary display (temperature, output current or sensor input) Full range of conductivity sensors — Make measurements in ultra-pure or high conductivity Programmable Security Codes applications — Prevents unauthorized modifications to transmitter configuration and calibration Advanced Digital Communications — Available with PROFIBUS® PA, FOUNDATION™ Fieldbus or Intrinsically Safe, Non-incendive Design HART communications — Permits use in hazardous areas Hazardous area transmitters — Withstand the harshest environments — NEMA 4X / IP65 housings TB82 Conductivity transmitters – 2-Wire DS/TB82–EN Rev. F General Description Temperature Compensation The ABB TB82 Series of two-wire conductivity The TB82 is compatible with a variety of automatic transmitters are available in three base configurations temperature compensation elements. to utilize ABB’s two-electrode, four-electrode or toroidal See Specification section. (electrodeless) sensors, allowing for installations ranging from ultra-pure water to the most difficult Programmable Security Code chemical applications. The transmitter has a three-digit security code to