eja118w,eja118n跟eja118y隔膜密封式差压变送器.pdfVIP

Contents Index General Model EJA118W, EJA118N Specifications and EJA118Y Diaphragm Sealed Differential GS 01C22H01-00E Pressure Transmitters [Style: S2] Diaphragm seals are used to prevent process medium form entering directly into the pressure-sensing assembly of the differential pressure transmitter, they are connected to the transmitter using capillaries filled with fill fluid. Model EJA118W, EJA118N and EJA118Y Diaphragm Sealed Differential Pressure Transmitters can be used to measure liquid, gas, or steam flow, as well as liquid level, density, and pressure. They output a 4 to 20 mA DC signal corresponding to the measured pressure differential. The transmitters also feature remote setup and monitoring through communications with the model BT200/100 BRAIN TERMINAL, CENTUM CS/XL system etc. ■ STANDARD SPECIFICATIONS Accuracy: Refer to GS 01C22T02-00E for FOUNDATION Fieldbus See Table 2-1, 2-2 and 2-3. communication type and GS 01C22T03-00E for Ambient Temperature Limits: PROFIBUS PA communication type marked with “.” -40 to 60 C (-40 to 140 F) (general-use type) Measurement Ranges: -30 to 60 C (-22 to 140 F) (with integral indicator) (Note : The ambient temperature limits must be within the Capsule Measurement Span Measurement Range fill fluid operating temperature range, see table 1.) 2.5 to 100 kPa -100 to 100 kPa