基于单片机控制的扫频信号发生器-毕业设计学位论文范文模板参考.docVIP

PAGE 毕业设计（论文） 题 目 基于单片机控制的扫频信号发生器 二○一○ 年 五 月 十 日 基于单片机控制的扫频信号发生器 【摘要】 本文概述了《基于单片机控制的扫频信号发生器》项目选题的研究意义，介绍该项目的具体设计要求以及研究的主要内容与研究方法。 根据项目的研究内容与设计要求，文中提出了《基于单片机控制的扫频信号发生器》系统实现的结构框图，并指出各模块之间的联结关系。在此基础上对各模块电路,包括单片机控制模块，电流源模块、锁相环路模块等各模块电路进行了详细的理论分析与具体电路设计与实现，最后得出整个系统的完整电路设计。通过计算机对各模块电路的仿真，电路设计具有合理可行性。 本文还包含对该电路进行了计算机的制板、元器件的安装、实验的调试、实验数据的测量与处理。设计结果表明，该电路符合项目设计的要求。 通过对该项目的研究，可以进一步促进扫频信号发生器在实际领域中的应用。 【关键词】 锁相环路，单片机控制技术，电流源模块，频率可变，电路设计 Based on MCS Control Frequency Sweep Signal Generator 【Abstract】 This paper has summed up the research purpose of based on MCS control frequency sweep signal generator and introduced the concrete designing requirement, main content and research methods of this project. According to the content of the project and designing requirement, this paper has proposed the structure block diagram that based on MCS control frequency sweep signal generator realizes and pointed out the connection between each module. Based on this, this paper has carried on the detailed theoretical analysis, design and realization to every module circuit including MCS control module, the current source modules and phase-locked loop circuit etc. On this basis, the intact circuit of the whole system is finally designed. Because of the computer based emulation of every module circuit, it is rational and feasible for the circuit design. This text also includes plate making for the circuit, installation of components, adjustment of experiment and measurement, debugging of experimental data. The results indicate that this circuit satisfies with the project design requirement. The study of this project can promote the application of sweep signal generator in practice in real life. 【Key Words】 Phase-locked Loop，MCS Control， Current Source Module ，Variable frequency，Circuit Design 目录 TOC \o 1-3 \h \z \u HYPERLINK \l _Toc261545206 第1章 绪论 PAGEREF _Toc261545206 \h 1 HYPERLINK \l _Toc261545207 1.1 选题的背景和意义 PAGEREF _Toc261545207 \h 1 HYPERLINK \l _Toc261545208 1.1