产15000吨婴儿配方粉工厂设计 模具专业毕业论文.docVIP

PAGE PAGE VII 摘 要 本文是关于计算机显示卡支架的级进模设计，由于难以一次加工完成，故用级进模生产，可以完成所需的复杂过程-冲孔和弯曲。制件的材料是LY12M铝。生产30万件。 此次级进模结构设计，完成的是对计算机显示卡固定板的冲裁、弯曲的复合工艺。本文首先对零件图及成型工艺进行了分析，并着重对排样方法进行了论证后合理的优选出排样方法。达到了提高利用率，降低生产成本和提高生产效率。 在经过了压力中心计算后改善了排样方法，并确定了模具的基本结构，简化模具结构、降低制造成本、提高生产效率。详细的描述了各个零件的设计与强度校核、工作部分的计算及标准件的选择过程。在对整套模具进行了经济性分析之后，对本次设计进行了总结。 本文建立了模具数字化三维模型，编制了一个典型件的工艺文件。 关键词：显示卡支架；成型工艺；级进模；经济性分析 Abstract This desighn is about the Stent of Computer Graphics.It’s hard to process and has difficulty to punch once.The multi-station progressive die assumped in this paper can finish the complex process—blanking and bending. The material of products is LY12M aluminum.The output is 300,000 Pieces. At this time designed of progressive die complet rushing to cut and curving compound technology of The Stent of Computer Graphics. This paper first analyses for part drawing and Bending technology, after expounding and proving emphatically for queuing up shape method, it is reasonable and good to choose row shape method, the location of the gate and the knockout way, reduces the production costs and increases the production efficiency. . After having passed pressure central calculation, have improved row shape method , and have determined the basic structure of mould. Described detailed course of selecting of every standard component?that has been designed and calculation. Summarized after having carried out economy analysis for complete die full paper. It built a 3D model of the die, compiled the process of a typical part. Keywords: Computer Graphics; type technology; row shape method; economy analysis 目 录 TOC \t 标题_谢辞及参考文献,1,标题_附录,1,第2级标题,2,第3级标题,3,第1级标题,1 1 引言 PAGEREF _Toc \h 1 1.1 级进模概述 PAGEREF _Toc \h 1 1.2 毕业设计内容、步骤 PAGEREF _Toc \h 2 2 零件图及成形工艺性分析 PAGEREF _Toc \h 3 2.1 零件图的尺寸公差及技术要求 PAGEREF _Toc \h 3 2.2 LY12M铝合金磁盘芯轴的机械性能 PAGEREF _Toc \h 4 2.3 弯曲件的工艺性分析 PAGEREF _Toc \h 4 2.3.1 成型分析 PAGEREF _Toc \h 4 2.3.2 弯曲件直边的高度 PAGEREF _Toc \h 4 2.3.3 弯曲件孔边的距离 PAGEREF _Toc \h 4 2.3.4 弯曲件的回弹 PAG