自动上下料机械手主要零部件设计与三维造型.docVIP

摘要 本次设计的课题是自动上下料机械手的主要零部件设计及三维造型，确定了机械手的座标型式和自由度，确定了机械手的技术参数。 机械手能代替人工操作，起到减轻工人劳动强度，节约加工时间，提高生产效率，降低生产成本的特点。在实用基础上，对自动上下料机械手直臂与夹持部件进行三维设计，其中分为三个部分：手爪、手腕、直臂。整体机械手为直角坐标型，驱动均为电机驱动，结构简单可靠，精度高。设计了手爪为平移型夹持式手爪，传动结构为滑动丝杆；手腕为回转型，转动角度为0-180°，传动结构为蜗轮蜗杆；设计了机械手的手腕结构，计算出了手腕转动时所需的驱动力矩；画出机械手的运动简图；对工作机构和传动系统进行设计计算，包括主要部件的设计计算、强度校核和运动分析；设计绘制起升装置的总图和主要零件工作图；利用三维CAD软件对主要零件进行实体设计和造型。 关键词：直臂与夹持部件；机械手；CAD二维设计；Pro/e三维设计 Abstract The topic of this design is the main component of the automatic up-down material manipulator design and 3 d modelling, determine the coordinates of the manipulator type and degree of freedom, determine the technical parameters of the manipulator. Robots can replace manual operation, reduce labor intensity, save processing time, improve the production efficiency, reduce the production cost. On the basis of practical, automatic manipulator arm straight up and down and clamping parts for 3 d design, which is divided into three parts: hand, wrist, arm straight. Integral type manipulator for rectangular coordinates, drive for motor drive, structure simple, reliable and high precision. Design hand claw clamping type gripper for translation, the transmission structure for sliding screw; Wrist for transformation, rotation Angle of 0-180 °, for the worm gear and worm drive structure; Manipulator wrist structure was designed, calculated the wrist when the driving moment; Draw the manipulator kinematic sketch; The working mechanism and transmission system design and calculation, including design calculation, intensity and the movement of the main parts of analysis; Design drawing general layout and main parts of lifting device working drawing; Using three-dimensional CAD software for the main parts for physical design and modelling. Key word: Straight arm and clamping parts; Manipulator; 2 d CAD design;Pro/e 3 d design 目 录 HYPERLINK \l _Toc13502 摘要I HYPERLINK \l _Toc13502 AbstractIITOC \o 1-3 \h \u HYPERLINK \l _Toc21133 Abstract PAGEREF _Toc2