基于winccflexible组态软件及PLC控制的车道控制机设计本科.docVIP

南京工程学院电力工程学院毕业设计（论文） 基于PLC的车道控制机组态设计 摘 要 本文在全面讨论车道控制机技术的基础上，深入研究了其中的控制系统结构。从系统设计的角度出发，提出了基于plc的控制系统解决方案。通过组态软件“wincc”，设计讨论了车道控制机的软件和硬件及其组态，并建立了控制机内外控制部分的集成监控系统。在分析车道控制系统功能的基础上，确定了系统的整体结构。 本文重点对车道收费流程控制方案进行了深入而详细的讨论，并提出了基于PLC的车道控制组态设计。通过组态软件与PLC的实时通信，实现了系统的实时监测、自动控制和运行诊断。本文方案满足了系统可靠性、稳定性和时效性要求功能，体现了先进性和实用性的统一。 关键词 车道控制，WinCC，PLC Abstract On the basis of the comprehensive discussion of roadway controller technology,this paper presents a thorough study of the control system structure.From the Angle of system design,one scheme is proposed based on PLC.We discussed the design of the roadway controller system and its software and hardware configuration through the configuration software “WinCC”.And an integrated monitoring system to monitor the systems internal and external components is established.The overall structure of the system is determined based on the analysis of the roadway controller systems function. To PLC as a tool,in-depth discussion of the driveway charging process plan has been taken.Focus on the configuration of the system,a PLC-based configuration design is proposed.The system could achieve its real-time monitoring, controlling and operation diagnosis by means of the real-time communication between the configuration software and the PLC.This scheme could meet the system reliability and stability and time-effectiveness demand function, embodies the unity of advancement and practicability. Key Words Roadway controller , WinCC , PLC 目 录 TOC \o 1-3 \h \u HYPERLINK \l _Toc30448 摘 要 PAGEREF _Toc30448 I HYPERLINK \l _Toc29574 Abstract PAGEREF _Toc29574 I HYPERLINK \l _Toc22959 1 绪 论 PAGEREF _Toc22959 1 HYPERLINK \l _Toc1190 1.1车道控制机技术 PAGEREF _Toc1190 1 HYPERLINK \l _Toc22496 1.2车道控制系统 PAGEREF _Toc22496 1 HYPERLINK \l _Toc23684 1.3 WinCC的性能特点 PAGEREF _Toc23684 2 HYPERLINK \l _Toc9104 1.4论文的主要研究内容 PAGEREF _Toc9104 3 HYPERLINK \l _Toc8120 2 车道控制机基本设备及其控制 PAGEREF _Toc8120 3 HYPERLINK \l _Toc1736 2.1 车辆检测器及自动栏杆 PAGEREF _Toc1736 3 HYPERL