质量周例会.pptVIP

质量周例会Weekly Quality Report 3.本周产生的投诉The complain in this week 本周发生的来料异常共 34 单，具体分布如下： A total of 34 times , distribution is as follows : 本周发生的来料异常The complain with incoming in this week 具体见附件.The attached is the quality analysis report 5.9% 2 按键弹片keystroke shrapnel 32.4% 11 按键Keypad 55.9% 19 塑胶件plastic LCD、装饰件各1单 LCD、accessorize of which has one time 2.9% 2 其它else 备注remark 比率rate 投诉次数 complain times 部品类别components 质检部质量周例会报告Quality Inspection Department Weekly Report W16 报告单位：质量中心质检部报 告 人 ： 张 岳 军 一、部品 1、 质量数据概况quality data summary 2、 质量数据推移及分析quality data process and analyse 部品品质MO延误率The MO delay rate with components 关键部品工程不良率The Defect rate on line with Key components 关键部品批次合格率The Pass lots rate with Key components 来料异常关闭The complain timely closed rate with incoming 生产异常关闭The complain timely closed rate with produce 3、本周产生的投诉The complain in this week 二、产品品控 1、 质量数据概况quality data summary 2、 SMT-交验合格率 Sampling Inspection Accept Ratio of SMT 3、 C4交验不合格率 Sampling Inspection Defect rate of C4 3.1 TCL品牌包装交验不合格率及主要影响因素3.2 ALCATEL品牌包装交验不合格率及主要影响因素 3.3 MOTO品牌包装交验不合格率及主要影响因素 4、外协贴片质量状况the quality issue on OEM mounting side 4.1直通率PRY 4.2各机型直通明细the pass rate for every project 4.3总装反馈外协贴片质量状况the quality issue on OEM mounting side 4.4、总装反馈外协贴片各机型前五项不良汇总Top 5 defect for every projects on OEM mounting side. 5、停线的质量问题Quality Issue for Line Stop 6、 C2例行实验报告状况C2 Weekly Test Report 7、质量异常关闭率QualityAbnormity Close ratio 8、客户投诉Customer Complaint 三、所需支持 1、 质量数据概况quality data summary 2、 质量数据推移及分析quality data process and analysis 部品品质MO累计延误率The MO delay rate with components 关键部品工程不良率The Defect rate on line with Key components 关键部品批次合格率The incoming lots acceptance rate with key components 来料异常关闭率The complain timely closed rate with incoming 生产异常关闭率The complain timely closed rate with produce 3、本周产生的投诉The complain in this week 部 品 质 量