单片机学习项目.docxVIP

单片机学习项目 项目19-彩屏液晶TFT的原理与应用 一：参考电路 电路原理图如下图6.3.3所示。要求叙述电路组成。 二：程序设计 程序主函数 /********************************************************** *???????????????????程序主函数????????????????????* **********************************************************/ #include reg52.h #include intrins.h #include LCD.h char code reserve[3]_at_ 0x3b; //保留0x3b开始的3个字节 void main(void) {? ???P2= 0xff; ???P0= 0xff; ???LCD_init();????????????????????//LCD初始化 ???LCD_clear(6);??????????????????//清屏LCD ??pic_play(7,61,8,74);?????????????//显示第1幅图片 ??pic_play(68,122,8,74);??????????//显示第2幅图片 ???pic_play(7,61,82,148);??????????//显示第3幅图片 ???pic_play(68,122,82,148);????????//显示第4幅图片 ??while(1)????; } ? /********************************************************** *??????????????????????????TFT彩屏的头文件??????????????* **********************************************************/ #ifndef __LCD_H__???????//头文件声明 #define __LCD_H__ #define?TYPE_LCD_DATA??????????????1 #define?TYPE_LCD_COMMAND?????0 ? #define uchar unsigned char #define uint unsigned int #define?DATA??P0 //定义彩屏和单片机的管脚连接情况 sbit LCD_RST??= P2^7;// sbit LCD_RST??= P2^0; sbit LCD_RD???= P3^2; // sbit LCD_RD???= P2^1; sbit LCD_WR???= P3^3; // sbit LCD_WR???= P2^2; sbit LCD_RS???= P2^5; // sbit LCD_RS???= P2^3; sbit LCD_CS???= P2^6; // sbit LCD_CS???= P2^4; //声明要调用的子函数 extern?uint colors[]; extern?void??delay_ms(uint ms); extern?void??LCD_Write(uchar type, uintvalue); extern?void??LCD_SendData8(uchar value); extern?void??LCD_Wirte_Data16(uintvalue); extern?void??Reg_Write(uint reg,uint value); extern?void??LCD_SetRamAddr(uint xStart,uint xEnd, uint yStart, uint yEnd); extern?void??LCD_init(void); extern?void??pic_play(uint Start_X, uintEnd_X,uint Start_Y,uint End_Y); extern?void??LCD_clear(uchar n); ? #endif ? /********************************************************** *?????????????????????????????彩屏驱动程序??????????????????* **********************************************************/ #include reg52.h #include intrins.h #include LCD.h #includehist2.h ? #define?NOP