最新Lesson 4 Corrugated Fiberboard Boxes 第4课 瓦楞纸板箱.pptVIP

四. Corrugated Boxes Bliss style container Bliss-style box design variations * hhjkl 4. Dimensioning Dimensions are given in the sequence of length, width and depth. Dimensions can be specified for either the inside or the outside of the box. Accurate inside dimensions must be determined to ensure the proper fit for the product being shipped or stored. At the same time, palletizing and distributing the boxes depends on the outside dimensions. The box manufacturer should be informed as to which 四. Corrugated Boxes Top Loading End Loading * hhjkl 五. Carrier Rules 1. Application The Uniform Freight Classification (UFC) and National Motor Freight Classification (NMFC) were established to categorize articles for shipment via common carrier with respect to value, density, fragility, and potential for damage to other freight. The classifications specify the conditions under which specific articles can be shipped and at what rates. When shipping by rail, refer to UFC. When shipping by truck, refer to NMFC. UFC rule 41 and NMFC item 222 are the most frequently used in describing corrugated packaging. There are four basic steps for determining authorized packaging: 1. Fully identify the product. 2. Select the proper governing classification. 3. Use the Index to Articles to find the applicable item number. 4. Consult the proper article to find the required packaging. * hhjkl 五. Carrier Rules Failure to comply with regulations can subject the shipper to penalties such as higher freight rates, refusal of acceptance by the carrier, or nonpayment of damage claims. 2. Summary of Rules for Corrugated Box Construction Carrier rules for corrugated box construction can be summarized as follows: Specified boards (using either Mullen burst test or ECT values) shall be used for a given product weight, providing the box does not exceed a specified dimensional limit. The dimensional size limit for a box is det