污染控制原理课件.pptVIP

* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * 游离水和溶解水会导致元件失效 和油的变质，故水的含量尽 可能低于溶解饱和度. 常用油的含水饱和度 液压油 : 200-400 ppm (0.02-0.04%) 润滑油 : 200-750 ppm (0.02-0.075%) 变压器油 : 30-50 ppm (0.003%-0.005%) 油中水和空气的污染 检测水的方法 裂解试验(游离水) 离心式(游离水) Karl Fischer Titration (游离水和溶解水) 蒸馏法(游离水和溶解水) Gear Pump Wear with Water and Particulate (Reduction in Volumetric Efficiency after 30 minutes) Dry Fluid (0-30 μm ACFTD) Fluid plus 10,000 ppm water 8% 33% Vane Pump Wear with Water and Particulate (Component weight loss - mg) Test Dry Fluid Fluid plus 500