基于MAYA参数化建模FLUENT设计与应用.docVIP

基于MAYA参数化建模FLUENT设计与应用 　　摘 要： 由于μDMFC结构尺寸的减小致使CO2气体容易阻塞阳极沟道，影响沟道内的气液输运。含气率作为评估沟道气液输运特性的标准之一，但是目前的后处理过程难以直接获取蛇形沟道沿程截面含气率，因此针对FLUENT后处理进行二次开发。该二次开发程序通过GUI传递模型特征参数，基于MAYA的可视化交互环境进行参数化模型的实时显示，并以日志文件作为接口实现MAYA和FLUENT间的数据传递从而实现参数化建模，进而获取沟道沿程截面含气率数值。最后基于二次开发软件研究了一种新型流场板结构，并发现改变双层流场板沟道侧壁面润湿特性能有效改善沟道气液输运特性。此处理方法不仅为研究燃料电池沟道输运特性提供了有效的数据获取手段，也为研究气液两相流动现象提供了解决思路。 　　关键词： 参数化建模； 二次开发； FLUENT； 气液两相流； 数值模拟； 流场板结构 　　中图分类号： TN304?34； TP391 文献标识码： A 文章编号： 1004?373X（2018）07?0115?05 　　Design and application of parametric modeling based on MAYA and FLUENT 　　SHI Junhao， LI Miaomiao， ZHU Rupeng 　　（Department of Design Engineering， College of Mechanical and Electrical Engineering， Nanjing University of Aeronautics and Astronautics， Nanjing 210016， China） 　　Abstract： It is easy for CO2 to block the anode channel due to the reduction of μDMFC structure size， and effect the gas?liquid flow in the channel. Since it is difficult for post?processing to directly obtain the gas fraction of cross section along the S?shaped channel， the second development of FLUENT post?processing was carried out. The model characteristic parameters is transferred in second development program through GUI. The parametric model can be displayed in realtime in the interactive visualization environment based on MAYA. The journal file is taken as the interface to realize the data transmission between MAYA and FLUENT， parametric modeling， and acquire the gas fraction of the cross section along the channel. A new flow?field plate structure is studied on the basis of second development software. It is found that the change of wetting property of channel sidewalls of double?layer flow?field plate can improve the gas?liquid flow property effectively. The post?processing method can provide the effective data acquisition means for studying the channel transport property of the fuel cell， and also provide a solution for studying the gas?liquid two?phase flow phenomenon. 　　Keywords： parametric modeling； second development