工艺技术--彩盒印后加工工艺设计（doc 44页）.doc

彩盒印后加工工艺设计 包装与印刷学院 印刷专业2001级3班 王敏 指导教师 陈新 摘 要：当今，人们对彩盒的外观要求越来越高。而满足这一需求的主要途径，就是对彩盒进行精加工。通过修饰和装潢，提高彩盒的档次和质量。据有关资料统计，好的包装可以使彩盒的销售额提高15%。印后加工的每一环节都是相互联系、相互制约的，只要其中某一道工序出了问题，都会对彩盒的最后成型造成很大的影响。在节约成本、降低损耗、减少环境污染的前提下，对彩盒的印后加工工艺进行优化设计； 论文首先对印后加工做了整体概述，介绍了印后加工的重要性，针对印后加工存在的一些问题进行分析，并展望印后加工的发展；接下来，详细介绍了彩盒印后加工常用的工艺，如覆膜、上光、模切压痕、烫金，及加工过程中应注意的事项；第三章提出了印后加工的技术要求，如在上光过程中如何调节温度、压力及速度，达到最佳效果；第四章通过实例分析，对彩盒的印后加工工艺进行优化设计。最后，对课题进行总结和概括，提出在印后加工中如何节省成本、减少对环境污染的一些建议。 关键词： 彩盒 覆膜 烫金 模切压痕 优化设计 印后加工工艺 ABSTRACT: Nowadays, The demand on appearance of color box is becoming higher and higher. The main approach to satisfy this demand is to carry on finish machining to the color box. Through decorating and mounting, improve the grade and quality of the color box . It is indicated that good packaging can make the sales amount of the color box raise by 15%. Every link of post-press processing connects each other, restricts each other. So long as some process goes wrong, it will cause great influence on the last shaping of the color box. On the premise of economizing the cost, reducing loss, reducing environmental pollution, carry on optimization design to the post-press processing technology Above all, give the whole summary of post-press processing, then introduce the importance of post-press processing, analyze the problems existing in post-press processing, And then, introduce the main technology of post-press processing in detail , such as laminating、varnishing、gilding and die-cutting. It is also very important to control the best temperature、pressure and the speed in the post-press processing. put forward the specification requirement in the third chapter; carry on optimization design to the post-press processing technology of the color box through analyzing the instance in chapter four. Finally, give some suggestion on how to reduce the cost and environmental pollution. Key words: color box laminating varnishing gilding die-cutting optimum design post-pre