毕业设计外文翻译--冲压成形与板材冲压.docVIP

邵阳学院毕业设计（论文） PAGE PAGE 10 Characteristics of Stamping and Properties of Sheet Metal Forming 1．overview Stamping is a kind of plastic forming process in which a part is produced by means of the plastic forming the material under the action of a die. Stamping is usually carried out under cold state, so it is also called stamping. Heat stamping is used only when the blank thickness is greater than 8~100mm. The blank material for stamping is usually in the form of sheet or strip, and therefore it is also called sheet metal forming. Some non-metal sheets (such as plywood, mica sheet, asbestos, l