PXI毫伏热电偶仿真模块-8通道.PDF

41-760 Millivolt Thermocouple Simulator Module ● 32, 24, 16 or 8 Channel Low Voltage Source ● Ideal For Thermocouple Simulation ● +/-100mV, +/-50mV and +/-20mV Output Ranges ● 0.7µV Voltage Resolution (+/-20mV Range) ● Two-Wire Output for Each Channel ● Remote Sense for Breaking Ground Loop Effects ● Open Circuit Simulation ● Supported in PXI or LXI Chassis ● Kernel and VISA Drivers ● 3 Year Warranty The 41-760 is a low voltage source module ideal for simulating the operation of a thermocouple, available with a choice of 32, 24, 16 or 8 channels. Each channel of the 41-760 provides a low voltage output across two connector pins capable of providing ±20mV with 0.7µV resolution, ±50mV with 1.7µV resolution and ±100mV with 3.3µV resolution, covering most thermocouple types. When used for Thermocouple Simulation the 41-760 The use of two wire outputs ensures that the 41-760 can be connected straight into the measurement can be used to accurately simulate low voltages even in system, bypassing the need for Isothermal Blocks and the presence of common mode voltages in the system. Cold Junction Compensation. To aid in this, Pickering Each Vcold connection is independent permitting the offers a 78-pin connector solution that has 32, 24, 41-760 to be connected to multiple cold junctions. 16 or 8 copper twisted pairs terminated with mini Each simulation channel is able to provide an open copper thermocouple plugs. Use of copper connections circuit setting to simulate faulty wiring connections to a minimises offset voltage generation in the connection sensor. interface. For improved accuracy each channel of the Low Alternatively Pickering can also supply connector blocks Voltage Source carries accurate calibration data stored that convert the copper