c语言模拟时钟转动程序d7bqzdzp.docVIP

#includegraphics.h #includemath.h #includedos.h #define pi 3.1415926 #define X(a,b,c) x=a*cos(b*c*pi/180-pi/2)+300 #define Y(a,b,c) y=a*sin(b*c*pi/180-pi/2)+240 #define d(a,b,c) X(a,b,c);Y(a,b,c);line(300,240,x,y) void init() /*划时钟边框函数*/ { int i,l,x1,x2,y1,y2; setbkcolor(1); circle(300,240,200); circle(300,240,205); circle(300,240,5); for(i=0;i60;i++) /*划钟点上的短线*/ { if(i%5==0) l=15; else l=5; x1=200*sin(i*6*pi/180)+300; y1=200*cos(i*6*pi/180)+240; x2=(200-l)*sin(i*6*pi/180)+300; y2=(200-l)*cos(i*6*pi/180)+240; line(x1,y1,x2,y2); } } #includegraphics.h #includemath.h #includedos.h #define pi 3.1415926 #define X(a,b,c) x=a*cos(b*c*pi/180-pi/2)+300 #define Y(a,b,c) y=a*sin(b*c*pi/180-pi/2)+240 #define d(a,b,c) X(a,b,c);Y(a,b,c);line(300,240,x,y) void init() /*划时钟边框函数*/ { int i,l,x1,x2,y1,y2; setbkcolor(1); circle(300,240,200); circle(300,240,205); circle(300,240,5); for(i=0;i60;i++) /*划钟点上的短线*/ { if(i%5==0) l=15; else l=5; x1=200*sin(i*6*pi/180)+300; y1=200*cos(i*6*pi/180)+240; x2=(200-l)*sin(i*6*pi/180)+300; y2=(200-l)*cos(i*6*pi/180)+240; line(x1,y1,x2,y2); } } main() { int x,y,i,k=1; int gdriver=9,gmode=2; unsigned char h,m,s; int o,p,q; float n; struct time t[1]; struct date d[1]; initgraph(gdriver,gmode,c:\\tc); initgraph(gdriver,gmode,c:\\tc); for(i=0;i=6;i++) { settextstyle(TRIPLEX_FONT,HORIZ_DIR,i); /*控制输出字符的字体，方向，大小*/ cleardevice(); settextjustify(1,1); /*在指定坐标上输出字符串*/ outtextxy(300,80,12) ; outtextxy(300,390,6); outtextxy(140,230,9); outtextxy(460,230,3); outtextxy(380,100,1); outtextxy(220,100,11); outtextxy(430,160,2); outtextxy(430,310,4); outtextxy(380,370,5); outtextxy(220,370,7); outtextxy(160,160,10); outtextxy(160,310,8); } init(); setwritemode(1); /*设置画线的输出模式*/ if(k!=0) { getdate(d); /*获得系统日期函数*/ o=d[0].da_year; p=d[0].da_mon; q=d[0].da_day; gettime(t); /*获得系统时间函数*/ h=t[0].ti_hour; m=t[