xxx纸业有限公司废水处理工艺设计设计说明书1qcrm1msc.docVIP

本科毕业论文（设计） 论文题目 XXX纸业有限公司废水处理工艺设计 学 院 环境科学与工程学院 专 业 环境工程 班 级 姓 名 学 号 指导教师 完成日期 广东纸业有限公司废水治理工艺设计 摘 要 本设计为广东……纸业有限公司废水处理初步设计，处理水量为13000m3/d。进水水质COD?2500~3000?mg·L-1，BOD5?1000~1300?mg·L-1，SS?2000~2800?mg·L-1，具有有机物含量高、可生化性强的特点。通过对造纸废水的水质、水量进行分析，从处理工艺，处理效率，成本费用等方面综合考虑选出SBR法作为核心处理工艺，处理后的出水严格达到《制浆造纸工业水污染物排放标准》（GB3544－2008)。 关键词 造纸废水；初步设计；?SBR? Abstract This preliminary sewage treatment design for the 、、、Paper CO, LTD, Guangdong is expected to treat maximum quantity of 13000m3 wastewater each day. Besides, specific inflow wastewater-quality indexes are as follows: BOD5 is in the range of 1000mg·L-1~1300mg·L-1, COD is 2500mg·L-1~3000mg·L-1 and SS is 2000mg·L-1~ 2800mg·L-1 respectively. Moreover, high concentration of organic compounds and good biochemical degradability are the characteristics of this wastewater. Having analyzed the quality and the total volume of this wastewater and also compared to certain integrated factors such as technology, efficiency and costs, etc., Sequencing Batch Reactor Activated Sludge Process is selected as the key process of the design eventually. After the treatment of this design, the effluent quality is projected to meet the standard of “Wastewater Pollutants Discharge Standard for Papermaking Industry” (GB3544－2008). Keywords Papermaking Wastewater；preliminary design ；SBR Process 目录 TOC \o 1-3 \h \z \u HYPERLINK \l _Toc5102 前 言 PAGEREF _Toc5102 4 HYPERLINK \l _Toc7020 1. 设计概述 PAGEREF _Toc7020 5 HYPERLINK \l _Toc23895 1.1设计资料分析 PAGEREF _Toc23895 5 HYPERLINK \l _Toc24533 1.1.1设计依据 PAGEREF _Toc24533 5 HYPERLINK \l _Toc19276 1.1.2城市概况和自然条件 PAGEREF _Toc19276 5 HYPERLINK \l _Toc3330 1.1.3 设计任务 PAGEREF _Toc3330 5 HYPERLINK \l _Toc25798 2.造纸废水处理工艺介绍 PAGEREF _Toc25798 6 HYPERLINK \l _Toc19253 2.1好氧生物处理技术 PAGEREF _Toc19253 6 HYPERLINK \l _T