【毕业论文】分布式快速反求测量平台的研究.docx

河南科技大学毕业设计（论文） PAGE \* MERGEFORMAT IV 分布式快速反求测量平台的研究 摘 要 反求测量过程中由于样件数字化的设备价格比较贵、利用率低，而且曲面重构技术对操作人员技术水平要求比较高，严重阻碍了反求技术应用和推广，但是很多企业急需利用此技术来设计和研制新的产品。为了解决此矛盾，本文设计了基于网络的分布式快速反求测量平台解决方案。将现有的反求资源集成到平台之中，提高了反求资源的利用率，同时为来自不同网络节点的用户提供快速、低成本、高质量的反求测量服务。 本文介绍了反求测量的基本知识，主要包括数字化技术、数据预处理技术和数据重构技术。根据反求测量实施过程，设计了反求测量平台基本功能框架，详细分析了基于网络的分布式快速反求测量的关键技术。 本文研究了基于网络环境下的分布式协同反求测量技术，分析了基于B/S和C/S混合模式的分布式协作反求测量。以CSCW理论为基础，利用计算机网络通信、多媒体等多项技术，设计了基于反求测量网络平台和net meeting的分布式协作反求测量、交流系统。 本文研究基于分布式快速反求测量网络平台的集成化技术，分析了以IGES格式为标准的数据交换和数据集成的模式，设计了相关数据转换接口选择。 本文利用网络技术、ASP技术和数据库技术构建分布式快速反求测量平台的主体框架。利用分布式协同反求系统，在线数据处理组件和集成化技术。 关键词：反求测量，CSCW，IGES  RESEARCH ON DISTRIBUTED COLLABORATIVE REVERSE MEASURING NETWORK PLATFORM ABSTRACT In process of reverse measuring, object’s nominalization equipments are expensive, low utilization rate and higher surface deconstruction techniques are needed for operators. These hinder the application and promotion of Reverse engineering. However, a lot of SMEs (small and middle enterprises) need RE for research and development of new products. To resolve this contradiction, solutions of distributed rapid reverse measuring network platform, thereby improve the resources efficiency. So fast, low-cost, high-quality reverse measuring service was provided to users who were from different network nodes. The basic knowledge of reverse measuring is introduced in this thesis, including objects’ nominalization, data pre-processing and surface reconstruction of 3D objects. According to the implementation process of reverse measuring, a basic functional structure of reverse measuring network platform was designed. The key technology for implementing distributed reverse measuring platform is analyzed, which includes several aspects as follow. Network based collaborative reverse measuring technology is researched in this thesis ; distributed collaborative reverse measuring in a mixed B/S and C/S mode have been proposed in this thesis . Based on the theory of computer supported cooperate