【毕业论文】成型磨齿分度机构分析研究及机构设计.docVIP

l 重庆大学本科学生毕业设计（论文） 成型磨齿分度机构分析研究及机构设计 学 生： 学 号指导教师： 专 业：机械设计制造及其自动化 重庆大学机械工程学院 二O一三年六 Graduation Design(Thesis) of Chongqing University Research and design of tooth indexing mechanism of forming grinding Undergraduate: Chen yang Supervisor: Prof. Liu Major: Mechanical Design Manufacturing and Automation College of Mechanical Engineering Chongqing University June 2013 l 摘 要 随着各种机械精度和功率的不断提高,高速、重载、高精度、硬齿面齿轮的使用越来越普遍,特别是随着火车、汽车等交通工具的提速,齿轮的加工精度直接影响到机械传动性能的提高。国际上，动力传动齿轮装置正沿着小型化、高速化、低噪声、高可靠性方向发展。为提高齿轮传动的承载能力，硬齿面齿轮设计制造技术，日益受到普遍的关注。磨齿是齿轮精加工的方法之一,磨齿精度直接取决于磨齿机的精度。磨齿加工的优点在于主要用来磨削淬硬齿轮,并且能纠正齿轮预加工的各项误差,可以获得很高的齿轮精度。影响磨齿精度的因素很多,如展成运动精度、分齿精度、砂轮质量、磨削吃刀量等,其中又以分齿精度的影响最大。所以,提高磨齿机的分齿精度是提高磨齿机加工质量的关键。 本文主要从成形磨以及分度机构两方面进行研究学习，并且对齿轮的材料的选择以及热处理等方面进行了学习分析，在学习分度机构的过程中，对于各种分度机构的结构、应用以及原理有了大概的了解，着重学习了端齿盘分度机构、以及万能分度头。最后根据所学知识，设计了一个简单的端齿盘分度机构，其中包括重要参数的确定，基本的结构等。 关键词：成形磨，分度装置，端齿盘，万能分度头。 l l ABSTRACT With improvement of varieties of precision machinery and power, the use of high speed, heavy load, and high precision is becoming more and more widely, especially with the accelerate of vehicle, such as trains and automobiles, the precision of gear directly affects the improvement of mechanical transmission’s performance. On the international, the power transmission gears are developing alongside the direction of miniaturization, high speed, low noise, and high reliability. In order to improve the carrying capacity of gear, the gear design and manufacturing technology is drawing more and more attention. Gear grinding is one of gear finishing methods; its precision directly depends on the accuracy of gear grinding machine. The advantage of gear grinding is mainly used for grinding hardened gear, correcting the error of gear, achieving the high precision of gear. There are many factors that affect the accuracy of gear grinding, such as the generating motion precision, accuracy of tooth, grinding wheel, grinding quality of cut