采煤毕业设计说明书hmdurupf.docVIP

摘要：本设计为林穆煤矿，矿井原设计为片盘斜井，由于原提升斜井偏离井田储量中心，且提升斜井、回风斜井井筒状态较差，无法继续进行井筒延伸，且原矿井深部煤质变差，为不可采煤层，因此为不影响矿井生产，改变现有生产中井下运输距离较长、井筒状态差等影响生产的现状，决定在井田西侧新掘两条斜井，作为原矿井的接续矿井，新井投产后，原生产矿井回撤，结束生产、封闭，在保证安全生产的前提下，合理地开发煤炭资源，把资源优势化为经济优势。 关键词：片盘斜井 储量中心 不可采煤层 煤炭资源 Abstract: The design linmu mine, mine was originally designed as film set inclined, since the original upgrade storage center shaft deviate from Ida, and enhance the shaft, the return air Inclined Shaft condition poor, unable to continue extending shaft, and the original deep mine coal quality variation, as non-coal seam, so as not affect mine production, change the existing underground production of long distance transport, affect the production shaft and poor status of the state decided to dig in the coal field west of a new two inclined, As a continuation of the original mine shaft, new wells put into production, mine retracement of the original production, the end of production, closed in the premise of ensuring safety, rational exploitation of coal resources The resource advantage into economic advantage. Keywords: Film disk inclined Storage Center Non-coal layers Coal resources 目 录 摘 要.............................................................................................................1 Abstract.............................................................................................................2 第一章 井田概况及地质特征..................................................................................7 1.1井田概况.....................................................................................................7 1.1.1交通位置...............................................................................................7 1.1.2井田范围...............................................................................................7 1.1.3地形、地貌............................................................................................7 1.2地质特征.............................................................................