路灯at89c51控制器毕业设计论文lhxbruf_.docVIP

核准通过，归档资料。 未经允许，请勿外传！ HYPERLINK ViewReport.aspx?No=19623路灯控制器 [摘要]：本文介绍的是一种基于AT89C51单片机为基础的路灯控制  \* MERGEFORMAT 系统设计，实现了通信、信号采集、控制与显示等功能。文中详细地描述了控制电路的设计过程，包括：光信号取样电路、LCD显示电路、照明灯控制电路等。对于软件设计主要有路灯逻辑判断与LED显示等程序设计。工作时,光信号取样电路采集光照强弱将信号送到单片机,单片机根据这些信息通过控制电路对照明设备进行开关操作,并实现自动纠错功能，从而实现照明控制,以达到节能的目的。 [关键字]：单片机；检测电路；控制系统 Street lamp controller Wang ***** (Grade 10,Class 4,Major electronics and information engineering，School of Physics and Telecommunication Engineering，Shaanxi University of Technology，Hanzhong 723000，Shaanxi) Tutor: Zhu **** [Abstract]: This paper are introduced the basis of street lamp control system designing based on AT89C51. It realized the communication and signal acquisition, control and display functions. This paper describes the design process of the control circuit in detail, including: light signal sampling circuit, LCD display circuit, lighting control circuit, etc.The software design are include programming of the street lamp logic and LED display.When it worked ,optical signal sampling circuits collected light strength and sent signals to single chip microcomputer,According to these informations,Microcontroller did switch operations through the control circuits of lighting equipment, and realize the function of automatic error correction, So as to realized the lighting control, and achieve the goal of energy saving. [Key words]: chip microcomputer; detection circuit; control system 目 录 TOC \o 1-3 \h \z \u HYPERLINK \l _Toc174 引言 PAGEREF _Toc174 1 HYPERLINK \l _Toc21326 1 系统方案设计 PAGEREF _Toc21326 2 HYPERLINK \l _Toc31998 1.1 系统设计要点 PAGEREF _Toc31998 2 HYPERLINK \l _Toc26031 1.2 系统设计思路 PAGEREF _Toc26031 2 HYPERLINK \l _Toc23307 1.2.1 方案一 PAGEREF _Toc23307 2 HYPERLINK \l _Toc2717 1.2.2 方案二 PAGEREF _Toc2717 2 HYPERLINK \l _Toc13098 2 硬件电路 PAGEREF _Toc13098 4 HYPERLINK \l _Toc8485 2.1 稳压电源 PAGEREF _Toc8485 4 HYPERLINK \l _Toc14335 2.2 单片机 PAGEREF _Toc14335 4 HYPERLINK \l _Toc18947 2.2.1 时钟电路 PAGEREF _Toc18947 7 HYPERLINK \l