螺旋输送机的单级圆锥齿轮减速器毕业论文rxbksdph.docVIP

螺旋输送机的单级圆锥齿轮减速器 【摘 要】这次毕业设计是由封闭在刚性壳内所有内容的齿轮传动是一独立完整的机构。通过这一次设计可以初步掌握一般简单机械的一套完整的设计及方法，构成减速器的通用零部件。 这次毕业设计主要介绍了减速器的类型作用及构成等，全方位的运用所学过的知识。如：机械制图，金属材料工艺学公差等已学过的理论知识。在实际生产中得以分析和解决。减速器的一般类型有：圆柱齿轮减速器、圆锥齿轮减速器、齿轮-蜗杆减速器，轴装式减速器、组装式减速器、联体式减速器。 在这次设计中进一步培养了工程设计的独立能力，树立正确的设计思想，掌握常用的机械零件，机械传动装置和简单机械设计的方法 和步骤，要求综合的考虑使用经济工艺性等方面的要求。确定合理的设计方案。 【关键词】减速器 锥齿轮 V带轮 联轴器 方案 【Abstract】This time graduate the design to have the contents a to design concerning the machine that decelerate the complets systeem . Decelerating the machine is a kind of from close to move in the rigid wheel gear in the hull is an independent complet organization.Pass this a design can then the first step controls general simple a set of complete designs step and methods of the machine. This time graduate the design to introduce the type function of the deceleration machine and constitute the etc. primarily, made use of all directionsly learned the knowledge.the metals material craft learns the theories knowledge that business trip etc.already learn, In actual producton can analysis definitely reach agre ement. The general type that decelerate the machine has:The cylinder wheel gear-Cochlea pole deceleraes the machine ,stalk park type decelerates machine, assembles type decelerate machine, couplet type decelerate machine, couplet type deceleratemachine Further educated in this time design independent bility that engineering design, set up the right design thought controls the in common use machine spare parts,the machine spread to move the device with the simple machine design of method with step, the consideration that device with the simle machine request of econmic craft etc.make sure the reaaonable design project. 【Key words】Bevel gear reducer coupling V pulley program一.选择电动机及传动系统总的传动比分配 1.电动机类型和结构形式： 按工作要求和工作条件，选用一般类型用途的Y（笼型）系列三相异步交流电动机。因为三项异步交流电动机具有效率高、工作可靠、结构简单、维护方便、价格低的特点，适用于不易燃、不易爆、无腐蚀性气体和无特殊要求的场合，由于其还具有较好的启动性能，也适用于某些启动转矩要求较高的机械。 2.工作机主动轴： PW = TNW/9550=74×128/9550=1 kw 3．电动输出功率 ：